They leak often to varying degrees. Could try sealants or glues as many have tried but no guarantee how long it will last

Sent from my MRD-LX1 using Tapatalk

I have been having issues lately with the carbon mk1 & find if you just want to get to the bottom of the carburettor (yes my air filter rubber is tough as old boots). Loosen both the screw clamps either side of the carburettor then twist it towards you (working from the petrol tap side) top first to...

Hi best of luck in your search. Was the bike for sale on ebay ? Did you have any1 come too see the bike ? This is why personnally I'd rather meet with a buyer on ebay at a neutral place. Then nobody knows where you live I know its no comfort but good luck anyway

hi my friends ar (Kramer he posted about it on hear) played up the same way & in the end it would only spark if he tried to bump start it by running with the bike as fast as possible. so we swapped the pick ups off my fly wheel (mk2) & hey presto it ran like a dream. worth a try maybe as I don't thi...

can i do the chopping please with a blunt blade. thanks

hanging is to good for the scum

it really should have been hidden away at least & a lot more chains & locks. saying that i had a dt125 in a locked brick garage & because there was about 1ft between mine & next doors garage the scum bust a hole in the wall & squeezed the bike out. but the best of luck to him

cheers back any pics or info which bikes take as little mods as poss plz ta

hi all has any1 ever put or heard of a crm motor in a road bike cos i love 2 stroke road bikes. but when looking they always sell for good money. but a rolling chassis of say a rd, nsr, ar, rgv & so on 125 or 250 ?would be cheaper & great fun. light, quick, nimble & very chuckable. ive seen rangtang...

oh the smell keep talking
then the sound
any 1 got a tissue

sorry but its just the smell of the 2 stroke being burnt & the sound of a 2 stroke. BANG consider yourself shot

hi i just remembered i had downloaded the crm manual off this site its 3mm as shown underneath

http://s1172.photobucket.com/albums/r56 ... 185806.jpg

i dont know about the cable but i wouldnt be surprised if it were stretched. but if the clutch plates are ok then i will try the cable. basically a case of try, check, measure & see what happens

basically it sometimes is hard to change through the gears but the old owner has put some nuts on the outer cable to hold the cable further out & the adjuster is fully out. but the clutch does not slip so an oil change & check the old plates 1st before ordering parts. LT want around £70 for clutch c...

hi my mk2 clutch is playing up so im wondering how thick the clutch plates should be to see if they need changed ??????????
thanx in advance