Looking good man I like the ed hardy stuff where did you get it all from?

Mash

I know this is an old thread but I just made a couple of these and they are excelent top marks for coming up with the idea howe!!

I made a bracket and mounted them on the bottom yoke bolts they fit nicely under the rad panels on full lock,


Mash

Skateboard wheels and a bit of threded bar work a treat!

[quote="SkidMark"]you need the airgap because the air is compressible[/quote] Yea so the less air there is the less air to compress making it stiffer Iv had many people say as a rule of thum have the oil 4 to 6 inches from the top depending on how stiff you want them, But it will never hurt doing a ...

iv got a 140 michelin on, it did have a bit of a disagrement with the chain guard but that was nackered anyway!

To be honest I have no idea what springs are in there but im sure someone on here can tell you?

The cheaper way to make them stiffer is to put a little more oil in, not to much but just a little about 10-15mm should be enough to start with

Mash

I have a friend using hel lines on his cbr 400 he said they fitted well with no probs and give good feel, What I brought is http://cgi.ebay.co.uk/Braided-stainless-steel-Brake-Hose-145-cm-long_W0QQitemZ270503686094QQcmdZViewItemQQptZUK_Motorcycle_Parts?hash=item3efb46afce The only problem is it does...

Hello mate, I think you should go out with the stock set up and see how it goes thats what iv done with mine and it handels fine though iv only been going playing around the streets on it, But if need be you could always do the compresion up a bit on the forks to get an idea with out doing anything ...

Iv always used a angle grinder to get them off

just be careful with it becasue you can take chunks out the yoke!

The rims I have are unbranded so I dont know what sort of price they would of be new, Theres some cheap xr sprockets on ebay at the moment I got a 38t for £10 delivered but they use 8mm bolts not 10mm that the crms do so I made some sleves to go inside the hub to space them down, You can get a peice...

[quote="Alex_H"]How'd ya get on with truing the wheels yourself [/quote] Not to bad but I work in a push bike shop and build wheels all the time the only problem I had was not having a big enough truing jig to put them in. [quote="Boredus"]Are they on standard CRM hubs? what were the costs etc?[/quo...

What do you think?

http://i772.photobucket.com/albums/yy1/ ... photo5.jpg

I'v heard about the TRF i'll have to look into joining, Apperently this definitive map and statement is ment to be the offical goverment copy of what's what and where's where, A guy came into work yesterday and said he's into enduro and knows about a couple of byway so i guess this map is a load of ...

Well I thought I'd find somewhere to go ride with out the police getting called out and moving us on so today I went to the local library to have a look at the definitive map and statement of rights of way in oxfordshire spent a good 45 mins looking over all these maps and couldn't find 1 byway open...

Hello thought i'd introduce myself my names ash Im a bit new to this off road malarki but i found out it's damn good fun,
Someone pointed me in the direction of this site so here i am.