just un bolt it?

its easy
capt

The Parts £450
Rebulid £200

My MK2 is great in the traffic now and also does not idle high for 6-10 seconds when hot. The angree wasp is run in after the total engine rebulid now. :P What stoped the Bucking and Hunting? New pilot jet,new carb gasket kit,new air filter,new pro seal filter gasket from ebay,new boyston reeds,new ...

I have to say, take it in to a good shop that have a true understanding of bike wiring. My CRM had alsorts of issues when I put it back together :o Just a simple issue ,there are two plugs behind the headlight that are the same fit--I put them around the wrong way :roll: The shop striped back the ou...

I have changed the presser in front wheel and that has fixed it,it rides much better :lol: I should have thought about this just missed it :lol: The speedo cable - when you look down at the front its hanging out like a flag :cry: I just had a look at the XR400 picture and that looks shorter? When I ...

LT have stickers for speedo. -20mph for 17inch wheels is near as dam it. the issue is the speedo cable is to long as you will see when you ride. :lol: I will be intrested to hear your thoughts when @ 70 on the motorway? and in heavy traffic "angery wasp"mine is :evil: I think the bike does not turn ...

Hello, My Mk2 does the same! but ticks over fine,it has a newly rebuilt engine,I took the bike back into the 2 stroke guro for an inspection. "quote!" the bike is old and not like modern 2 strokes - we will look at the jetting opptions @ 400 miles - could be carb wear but it did look ok when we clea...

I cannot see anything in the FAQ. This is strange,I have got my MK2 back together and it runs like new ,before I removed the engine all the lights worked fine. I cannot remember - Can the bike start with the stand down? My bike will only run with the stand up. when I switch the lights on the stand l...

thanks for this.
Fixed now,very lucky it was raining when I got back that day ,so I did not notice that it had spilled all the coolant overnight.

Could have killed my engine.

I should have been more specific.there are a few pipes. MK2,At the rear of the Head there is a small grey pipe around 10ml in diameter and 15 inch long,I think it maybe part of the coolant system,does it fit on the carb? there is another similar pipe about 15ml that comes of the right hand side of t...

Could anyone please tell me what part of the bike does the pipe on the top of the head go to?

Mine is come off and I can not see where it goes.

Also how lose should the front sprocket be there seams to be a lot of travel side to side?

Tx

Capt

Good Luck with that project Niel. I have a project in motion as well. be very wise around TRX Engine mods,and to be fair you might save a few pounds by using the piston and a diffrent small end. My ethos after much help from the guys on here,LT only! when you call them everything becomes standard fa...

I have a front light if you need one!
tx
Capt

just had my MK2 engine striped ,because it was pushing oil out of the breather. We cannot see anything wrong! the tips I have been given ,crank seals but they look ok ,the spacer on the end of the crank that takes the bigger brown seal has slight marks but still seals ok,but replacing anyway! all th...

hello,
Any good tips to on how to get the bearings out off the back wheel on a mk2?
I have not got a tool and they seem firmly set in the hub.
tx
kirk