I emailed leisure trail and they dont have any broken ones just new ones at a price of 484 . going to just send it in a few weeks and hope for the best.

how much did it end up costing to post it ? did you say it was worth 480?. cheers

the regulator is fine the lights dont dip at all. going to send the pgm to nick in the next few weeks im just abit paranoid of it getting lost in the post if im honest , 480 pound for a new pgm thats if you can get one.

cables are lovely and oiled up and the powervalve moves easily in the cylinder. all wiring is okay everything is fine. it seems to work now and again so i deffinately think it is the pgm :( . untill i have the spare funds i am just going to disconnect the servo and have it half way open. is there an...

that must be it then. who is nick how could i contact him? thanks

is the ecu the pgm ?sorry if im being stupid. what would shuld i do next ? try and find a new ecu or have mine repaired ? is there a way i could test the ecu to see if it is broke.

not working again now :@ starting to get right on my nerves ! i went out on the bike for 3 hours and all was good got home made somthing to eat then started the bike again to see if it was okay and once againit is just stuck open! if i pull the powervalve so it closes, as soon as i start the bike it...

hi i havent took the loom loom off but i disconnected every electrical plug i could see on the bike cleaned them then changed the fuse and now shes running spotty dog after alot of head scratching and countless cups of tea. thanks for the help

messed around with it abit more put it back together and now it works spot on. I have restarted the bike about ten times now to check it is working and all is ok. i took it for a test run aswel and working . dont have a clue what was wrong with it but thanks for all the help anyways guys.
nathan

I dont know anybody with a crm in the area i have only ever seen 3 o f these bikes and owned 2. my friend had n AR and never had a probem with it. should the cables be quite hard to move by hand ? ive opened everything up cleaned it grased it and put it back together but it is still quite hard ?. is...

fiddled on with it did the tests with the multimeter they all seemed okay. when i got the servo and everything back together it worked perfectly for say 5 minutes then back to stuck open ? any other ideas

hi i recently purchased a 1998 crm 250 ar with 9500 miles from new :] upon riding the bike i thought it felt abit flat bottom end so i took the powervalve cover off to check it was working but upon starting the bike and revving it the powervalve wasnt moving at all and was stuck open. i disconnected...