https://www.wemoto.com/bikes/honda/crm_ ... el_remover

I have something similar to the above. Makes the job easy and less likely to damage something. Might be worth checking the thread sizes, but the one I have, has fitted various other bikes.

This is from a MK3, but its probably the same/simular on the AR. It's not a great photo, but it show which way the cable goes around the shock. The frame should have a metal lug that the plug fixes to, so its not floating about (you can just make out another metal lug under the blue plug). I have so...

I can't remember how the idle screw works on these carbs. Does it just lift the throttle slide when it is screwed in? Almost defiantly you will need the o-ring.

I haven't tried one I'm afraid and I'm not sure I would bother either. Where about are you? Why not use the money for a new carb to get someone to look at it for you.

Do you mean the outer basket which fits over the clutch plates or the inner basket which fits under the plates?

viewtopic.php?f=20&t=7561

I didn't thing the mk1 and mk2 forks where interchangeable without changing the triple clamps.

Do the mk1 and mk2 share the same frame?

Sounds like the side stand switch is faulty. Its quite easy to bypass, not sure if they are still available.

https://www.cmsnl.com/honda-crm250r-199 ... 700kae305/

https://www.cmsnl.com/honda-crm250r-199 ... lJoWXrMK5c

It looks like that part isn't available separately. You will have to find a 2nd hand pump and rob it of the part you want.

The triple clamps don't have a hole for the ignition barrel, the barrel is mounted on a bracket mounted to the underside of the clamps. These are the only pic of the clamps I have to hand. https://i.ibb.co/XkQgqjj/DSC-0029-1.jpg https://i.ibb.co/4R1HMRM/DSC-0037-1.jpg What size are the cr forks you ...

It might be worth doing a bit of a search on here, there is loads of info about wheels, starting here, http://www.crm250.com/forum/viewtopic.php?f=20&t=5556 These bikes are getting old now, so its becoming difficult to get decent rims which aren't rotten under the rim tape. I ended getting new rims ...

http://www.crm250.com/forum/viewtopic.php?f=20&t=5556 I always fit Metzeler 6 day extreme, but my mate always swears by Michelin comp, so comes down to personal preferences. I would imagine any road legal enduro tire from any top brand would be good. I see a lot of people fit Mitas enduro tires, bec...

http://www.crm250.com/forum/viewtopic.php?f=20&t=5261

One of the links still work.

https://www.cmsnl.com/honda-crm250r-199 ... 107ke1000/

Is this the part you are looking for? CMS are a little expensive now since brexit, so its probable worth running the part number off there site with some UK suppliers.

Hi,

Welcome to the forum. I think the mk2s look the best. Good luck with the rebuild.

Nice to see a little flurry of new members recently.

Christian