Search found 8 matches

by oilinsmoke
22 Sep 2015, 21:49
Forum: Technical
Topic: CR/CRM Fork leg length
Replies: 9
Views: 11895

Re: CR/CRM Fork leg length

Hi i have a mk2 can measure the legs for you if you like,i'm not a hundred percent certain on this but i thought the cr forks where larger diameter than crm could be wrong though
if you want me to measure them just msg me back and i'll go do it
rgeards
G
by oilinsmoke
18 Sep 2015, 21:19
Forum: Technical
Topic: crm engine
Replies: 11
Views: 15143

Re: crm engine

Hey of course it developed beyond that when the water pump drive gear fell appart !!! brittle old plastic liesure trail to the rescue once more
so all back in one piece and running sweet as a nut,saturday tomorow pesky work till dinner then off on some local trails with a couple of hte lads (orange ...
by oilinsmoke
09 Sep 2015, 22:35
Forum: Technical
Topic: crm engine
Replies: 11
Views: 15143

Re: crm engine

sure enough removed the clutch cover got to the oil pump and luckily the gear on the end was preventing the seal from falling off into the housing !!!
quick trip to liesure trail seals in stock oil for the refill water pump gasket snd chsnge form a twenty ;) just have to put it back together.
thanks ...
by oilinsmoke
06 Sep 2015, 21:58
Forum: Technical
Topic: crm engine
Replies: 11
Views: 15143

Re: crm engine

Hey
now you may be on the rite track there,first port of call was to check the level after running it again today i checked the level and it appears to be higher now than it was yesterday,on removing the level bung the oil that came out appeared to look like 2stroke oil hmmmm it was such a nice day ...
by oilinsmoke
04 Sep 2015, 20:43
Forum: Technical
Topic: crm engine
Replies: 11
Views: 15143

Re: crm engine

Hey,yeah thought about that is there a breather for the engine other than the pipe on top of the casting ?
it's fine if i let it warm up or ride it gently,but when i give it some stick after a fairly short wide throttle opening when i stop it pours gearbox oil onto the floor from the breather on top ...
by oilinsmoke
03 Sep 2015, 21:54
Forum: Technical
Topic: crm engine
Replies: 11
Views: 15143

Re: crm engine

Hi thanks for reply,i believe the clutch side crank seal is suspect due to the gearbox getting presureised,pulls well and doesn't have any rumbles so think the mains are ok,can't think of any thing else that would cause it ;) called in at liesure trail today and picked up a pair so gonna try n get ...
by oilinsmoke
02 Sep 2015, 20:05
Forum: Technical
Topic: crm engine
Replies: 11
Views: 15143

crm engine

Hey every one finally got my hands on another crm :D
it was a scruffy old thing when i got it but a couple of hours with the pressure washer and a lot of traffic film remover turns out it's white ! ok so i take it for a few little rides low throttle etc checking out reliability etc everything seemed ...
by oilinsmoke
28 Mar 2015, 18:56
Forum: New Members Intro
Topic: another returning member
Replies: 0
Views: 3320

another returning member

Hi guys after a few years with roadies and the unmentionable Austrian 4 bangers I'm looking for another crm
got into doing trials on my gas gas txt280 and remembered the smell the noise oh how I had forgotten,one of the guy's I ride with has a crm I had a go for old times sake and now need another ...