Hi fellas. I found out what this was. The aftermarket indicators had corroded where the bulb makes contact. I rubbed it down to make a better contact and it worked just fine. Rob

Well spotted! Will do thanks.

ive drained the oil tank and fitted a clear feeder pipe to the pump. The pipe didn't fill until I bled the pump whilst the bike wasn't running. I started the bike and everything looked great. A clear supply of oil in both pipes as per the pic below. When I stopped the engine a bubble appeared in the...

lol. That's a good tip. It looked better than that but got worse the longer I left it. Cheers

Hi fellas. Could you have a look at the picture and video below. There seems to be far too many bubbles in the pipe for my liking. I've bled the oil pump as per the manual. Does this look correct? Thanks very much

https://imgur.com/a/UNVbk
https://youtu.be/LYoxtx4nTWQ

It's definitely pumping. How would I know if it was letting oil into the crank case? Cheers

Thanks for your reply. Sorry I didn't phrase the question properly. Engine off and a no/tiny amount of oil passes the pump. Engine on and the pump pulses/pumps a very small quantity of oil. I'll post a video when I can to check. Cheers

Hello. I have a few questions please fellas. I've connected all pipes and the new speedo cable and the pump pulses oil out with the engine started. Does this sound correct? Can anyone provide a picture of how the oil pump cable should be rooted please? And finally where can I get the small metal pla...

I've been looking at some pics and I can see that link pipe now. Thanks very much

Ah well mines a MK2. Am I correct in thinking the outlet at the front of the frame goes to the bottom of the autolube. Pictures are here CRM250 MK2 Oil Pump Setup https://imgur.com/gallery/YZyfo Thanks

That's a good idea. Well tonight I poured some out into the frame to see what would happen after connecting some of the rubber pipes. The oil spilled out of a pipe connector? from under the petrol tank that has nothing connected to it. Any ideas what this could be? I assumed the pipe at the front of...

Everything is back together. She started within a few kicks and there are no leaks...for now. I'd ordered a few other parts so I need to finish them off before I can go for a test run. I've been tinkering with the autolube tonight but that ended up with oil all over the floor. Something is missing u...

Hi fellas. My CRM has an oil pump but the hoses have been removed. It was like this when I purchased it. Should I just use a similar size diameter hose for each pipe or do I need to get specials ones? In the diagram I have it looks like the hoses are bent/shaped in a particular way. I'm thinking thi...

Finally had some time to get this finished off. Thanks for your help.

Thanks Mike. You're a mind reader!