Search found 55 matches
- 30 Nov 2023, 16:31
- Forum: Technical
- Topic: Carburettor jets and float bowl seal
- Replies: 1
- Views: 1325
Carburettor jets and float bowl seal
I had to hunt around to find a new pilot jet https://www.frankmxparts.com/epages/62910900.sf/en_US/?ObjectPath=/Shops/62910900/Products/1074/SubProducts/1074-0001 Air mixture spring https://www.frankmxparts.com/epages/62910900.sf/en_US/?ObjectPath=/Shops/62910900/Products/1858 And this seal fits the...
- 01 Feb 2018, 12:19
- Forum: New Members Intro
- Topic: New to CRM's....
- Replies: 1
- Views: 4428
Re: New to CRM's....
won't need graphics if you plaster it with mud have fun
- 17 Apr 2017, 20:18
- Forum: Technical
- Topic: I need to clean the carb what is the best way to get at it.
- Replies: 12
- Views: 13036
Re: I need to clean the carb what is the best way to get at
how did it go bbob? did ya try a bit of heat to soften up the rubbers? or swing sub-frame up?
- 29 Mar 2017, 22:27
- Forum: Technical
- Topic: oops! fried my pgm :-(
- Replies: 7
- Views: 7756
Re: oops! fried my pgm :-(
my solution for where to mount me electrex reg/rec was inside the airbox (think i read about it on here somewhere...) welded washers onto 6mm stud & bonded them to airbox cover. its yet to be tried in action, quite a fiddle to get cover back on airbox but the reg/rec will have fresh air @ won't get ...
- 21 Jan 2017, 14:30
- Forum: Technical
- Topic: oops! fried my pgm :-(
- Replies: 7
- Views: 7756
Re: oops! fried my pgm :-(
thanks to Andrew Firman who donated an untested Mk3 PGM to the cause i now have two broken Mk3 PGMs so have been tempted into investigating if i can, with the help of a mate, mend one of 'em :-) The first task was to hacksaw through the plastic case, separating the connector from the case too. The c...
- 01 Dec 2016, 12:36
- Forum: Technical
- Topic: CRM250 MK2 replace MK1 wiring loom and Ignition system
- Replies: 3
- Views: 4201
Re: CRM250 MK2 replace MK1 wiring loom and Ignition system
there is good information about the cdi and flywheels in the Frequently Asked Questions
viewtopic.php?f=20&t=5263#p59999
though it does not seem to mention Mk1 cdi/flywheel compatibility
viewtopic.php?f=20&t=5263#p59999
though it does not seem to mention Mk1 cdi/flywheel compatibility
- 02 Nov 2016, 12:16
- Forum: Technical
- Topic: oops! fried my pgm :-(
- Replies: 7
- Views: 7756
Re: oops! fried my pgm :-(
nick reckons he doesn't fix the no spark problem
i've pinned the problem down to a duff regulator/rectifier which in turn broke the sparky side of PGM. Got a replacement Electrex reg/rec so now face the problem of where to place the larger unit.
i've pinned the problem down to a duff regulator/rectifier which in turn broke the sparky side of PGM. Got a replacement Electrex reg/rec so now face the problem of where to place the larger unit.
- 29 Jul 2016, 21:12
- Forum: Technical
- Topic: oops! fried my pgm :-(
- Replies: 7
- Views: 7756
oops! fried my pgm :-(
if anyone has a pgm suitable for a mk3 (md24) available i would like to buy it.
in the meantime ... i came across this int'restin' dissection site
http://mastercircuits.blogspot.co.uk/20 ... oblem.html
in the meantime ... i came across this int'restin' dissection site
http://mastercircuits.blogspot.co.uk/20 ... oblem.html
- 16 May 2016, 13:20
- Forum: Technical
- Topic: no spark - i'm out of ideas
- Replies: 8
- Views: 7744
Re: no spark - i'm out of ideas
i don't think it'll be ht lead because i can measure a resistance between plug cap and frame
- 12 May 2016, 12:11
- Forum: Technical
- Topic: no spark - i'm out of ideas
- Replies: 8
- Views: 7744
Re: no spark - i'm out of ideas
thanks, i eliminated the key switch & kill switch earlier on & when i had it hooked up to sillyscope i saw a spike with ignition on & no spike with ignition off
- 11 May 2016, 12:39
- Forum: Technical
- Topic: no spark - i'm out of ideas
- Replies: 8
- Views: 7744
Re: no spark - i'm out of ideas
reading 'CDI/ECU Problems' FAQ suggests i should check voltage supply, might try injecting 12v into the loom
- 11 May 2016, 12:34
- Forum: Technical
- Topic: no spark - i'm out of ideas
- Replies: 8
- Views: 7744
no spark - i'm out of ideas
Firstly, how it stopped; did a couple of laps of a small track & engine spluttered & stopped. it seemed to me like it had run out of fuel, topped it up & still wouldn't start, decided it must be the carb blocked. Took carb apart & there was a lot of silty sediment in it (previous run had been very d...
- 17 Feb 2016, 12:41
- Forum: Technical
- Topic: HT lead detaches from ignition coil
- Replies: 2
- Views: 3424
HT lead detaches from ignition coil
I've discovered that on my Mk3 (same coil as AR) the HT lead screws into the ignition coil in the same way as the plug cap screws in. All other coils i've seen have the lead fixed in place. Just wanted to add to the information pool :-) hopefully when i re-assemble with a new bit of lead i will have...
- 11 Dec 2015, 12:46
- Forum: Technical
- Topic: Starting without brake lights connection
- Replies: 1
- Views: 2971
Re: Starting without brake lights connection
yup, no reason why it shouldn't
- 10 Dec 2015, 12:45
- Forum: Motards / Specials / Rebuilds
- Topic: 1991 MK2 CRM Supermoto Project
- Replies: 162
- Views: 118963
Re: 1991 MK2 CRM Supermoto Project
yup, exactly as you described sean. Can be a bit difficult getting the last bubbles of air out when bleeding because the standard nipple is usually placed at the highest point of the caliper so that any bubbles rise up through t'nipple & so with the banjo replacement nipple you may need to unbolt th...