the issue is the speedo cable is to long as you will see when you ride. :lol: Capt I dont understand how the speedo cable could be to long , 17'' front or 21'' the hub is in the same place ! I'm also interested in this speedo issue as I have built my 17''s on standard hubs - On my car you can change...

Yep should be fine however I would advise you to run washers and nut's as I dont think the threads will hold in the plastic I'm assuming you have used nylon or acetal or something similar.

Looking foward to hearing your results

Best Regards
Paul

Why is it a nightmare on the road ? front wheel wont stay on the ground ?

[quote="SkidMark"]Sweeeeeeeeet - (and that's generous for me when commenting on a supermoto ;) )

What is the headlight cowl you have on there and where did you get it from?[/quote]
Re the headlight cowl I think it could be a Acerbis headlight by the look and shape of it

G'day Mate the plastic tank has been done many times but requires alot of modification so in short there is no plastic tank you can buy for a Mk 3 or AR that will fit straight on and match your plastics and seat. You shouldn't be having any problems getting parts for an AR in australia as they where...

I looked at one site that had a different disc listed for the rear of the CRM to the XR 400 and it was saying the CRM disc is 4mm thick with a minimum thickness of 3mm , I straight away checked my rear disc and it was the sizing listed for the XR 5mm thick with a minimum of 4mm so Knackered is right...

It might also be cheaper for you to get a XR400 98 front disc and increase your options too

they are the same size and fitment as the CRM MK3 (thanks for that usefull infirmation Knackered) it's

helped me with my Motard project, I also own a MK3

Each to there own It's not a modification i will be making

I would say your a brave man. The part your are talking has a key word in it's description (balance)

and now that you have played with it you are experiencing bad vibration in the handlebars which is been

generated by your motor, I would listen to what your motor is telling you.

Flat out 123 kmh according to the speedo (could be out by miles) and will be once I've finished the 17"s Motardies as I'm using stardard hubs the speedo drive will remain fuctional but read incorrect I wonder if this can be fixed ? I have a simular problem in my car ,changed the diff ratio and the s...

It sure is Jack your spot on The leisure Trail one is adjustable backward and forward,The one I have designed is fixed, however you could slot the holes in the top in the horizontal direction if you wanted to but the plate will become weaker. You can run 50 teeth with my plate possibly more. Best Re...

How much did your Talon set you back Knackered ?

G'day guys I'm in the process of sourcing a 320mm front disc and caliper bracket for my Motard Rims My question is what is everybody using I have seen some really nice ones on some of the japenese Motards some of the members have posted pics of in the past but there doesn't seem to be much out there...

Sorry Guys I Run 13/49 with this plate my mistake it's been along time since I've looked at the rear sproket that close

Hi Guys I should of done this years ago but here it is --- I run 13/48 with this setup no worries


http://yfrog.com/28dropperplatedrawingp