Welcome to a fellow Aussie, where abouts are you?

Looks more like an NSR. I need to see close ups of the filler lid area.

ok, progress has seriously slowed down with an increase in responsibility at work and two children really do suck up all free time. I've managed to source some electrical connectors, snap the head off the rear brake bleed nipple after flushing the fluid (drained it by undoing the brake line banjo bo...

What parts are you after? Consumables can be replaced with some generic parts. I am still part way through my rebuild.

Australia officially received them so us Aussies can buy genuine parts from Honda.

Welcome too

Once I get mine running I hope to be agreeing with you

Action have closed and all the floor stock has been redistributed.

You'll find that all the good Honda dealers have the online fiche systems now. It's best to shop around at a couple to see which one will give you the best price.

I've been dealing with Western motorcycles (in Penrith) and they have been good, I'll see what the Deakin prices are like.

Welcome,

Good to see another Aussie on the board. I have a spare stock headlight with one of the mounting tabs broken of lying around somewhere.

Yeah the thickness of the rotor means I usually leave one pad out, fit the caliper and then slip the pad back in.

Did you also find that the clearance from the caliper to the rim is bugger all?

I got a chance to work on the bike a fair bit and bearings were pressed in or fitted Fitting the lower steering race was interesting. http://i48.photobucket.com/albums/f226/mekros/Bikes/CRM250AR/IMAG1840.jpg motard wheels test fitted. http://i48.photobucket.com/albums/f226/mekros/Bikes/CRM250AR/IMAG...

No reply to my question above so I ordered Honda "collars" and generic bearings... Whilst I was waiting for bits to come in: My second child was born, now that means even less time to tinker and ride :o A set of Sun branded XR400 motard rims were bought at a cheap price from a guy that decided to pa...

I'm happy to be a test mule.

Lixianda, are they exact replicas if the existing unit or have you made them programmable?

Does anyone know if the all balls linkage bearing kit will be compatible for the AR?

Life has been busy outside of the bike world, over the weekend I managed to break out the heat gun and blind bearing puller: http://i48.photobucket.com/albums/f226/mekros/Bikes/CRM250AR/IMAG1592.jpg http://i48.photobucket.com/albums/f226/mekros/Bikes/CRM250AR/IMAG1593.jpg Bagged and tagged as usual ...

Knowing how some mechanics work/think, I'm not surprised at all if the spacer was recycled and used again.