Page 1 of 1

Bike now workin 100%!

Posted: 26 Nov 2009, 18:03
by delvey91
Just a video i took today. As you can hear the bike is now running 100 % :BB :D :D

http://www.youtube.com/watch?v=ILlAQ3GbRIc

Re: Bike now workin 100%!

Posted: 26 Nov 2009, 19:32
by fallenmikethebike
:?: What remedy did you apply?
Mike

Re: Bike now workin 100%!

Posted: 26 Nov 2009, 19:49
by delvey91
avva look here Mike viewtopic.php?f=6&t=5284&st=0&sk=t&sd=a

The main problem was dirty fuel and it had been left idle for about 10 months

Re: Bike now workin 100%!

Posted: 26 Nov 2009, 21:39
by knackeredMk1
Sounds good now 8-) .

What gearing are you on :?: . I've got 14/40 on my SM wheels which gives me almost exactly 10mph/1,000 rpm on my Mk1 (lower 6th gear than other Mks).

Re: Bike now workin 100%!

Posted: 26 Nov 2009, 22:12
by delvey91
Its curently running 14/42. It was running 14/38 when i got it but i found that was far too high geared. Im not too sure on what rpms im doing per mph. My next investment will be a trailtech computer so i can get a rev counter. Top speed is about 85mph

Re: Bike now workin 100%!

Posted: 26 Nov 2009, 22:19
by knackeredMk1
You're a bit higher geared than me. My 6th ~ your 5th.

Vapor is the one to go for with the idiot light back board.

Re: Bike now workin 100%!

Posted: 26 Nov 2009, 23:49
by josh mk 2 crm
Hello

Next time your around plymouth give me a shout plz,

i need to see what a crm250 should run like!! i dont think mines running properly!!

Re: Bike now workin 100%!

Posted: 27 Nov 2009, 23:46
by delvey91
Yep will do josh :)

Re: Bike now workin 100%!

Posted: 04 Mar 2010, 11:38
by delvey91

Re: Bike now workin 100%!

Posted: 13 Mar 2010, 21:57
by delvey91
8-)

Image

Image

Image