Page 1 of 1
Bike now workin 100%!
Posted: 26 Nov 2009, 18:03
by delvey91
Re: Bike now workin 100%!
Posted: 26 Nov 2009, 19:32
by fallenmikethebike
What remedy did you apply?
Mike
Re: Bike now workin 100%!
Posted: 26 Nov 2009, 19:49
by delvey91
avva look here Mike
viewtopic.php?f=6&t=5284&st=0&sk=t&sd=a
The main problem was dirty fuel and it had been left idle for about 10 months
Re: Bike now workin 100%!
Posted: 26 Nov 2009, 21:39
by knackeredMk1
Sounds good now
.
What gearing are you on
. I've got 14/40 on my SM wheels which gives me almost exactly 10mph/1,000 rpm on my Mk1 (lower 6th gear than other Mks).
Re: Bike now workin 100%!
Posted: 26 Nov 2009, 22:12
by delvey91
Its curently running 14/42. It was running 14/38 when i got it but i found that was far too high geared. Im not too sure on what rpms im doing per mph. My next investment will be a trailtech computer so i can get a rev counter. Top speed is about 85mph
Re: Bike now workin 100%!
Posted: 26 Nov 2009, 22:19
by knackeredMk1
You're a bit higher geared than me. My 6th ~ your 5th.
Vapor is the one to go for with the idiot light back board.
Re: Bike now workin 100%!
Posted: 26 Nov 2009, 23:49
by josh mk 2 crm
Hello
Next time your around plymouth give me a shout plz,
i need to see what a crm250 should run like!! i dont think mines running properly!!
Re: Bike now workin 100%!
Posted: 27 Nov 2009, 23:46
by delvey91
Yep will do josh
Re: Bike now workin 100%!
Posted: 04 Mar 2010, 11:38
by delvey91
Re: Bike now workin 100%!
Posted: 13 Mar 2010, 21:57
by delvey91