Excell #'s

Post Reply
User avatar
OOQRA
New kid on the block
New kid on the block
Reactions:
Posts: 5
Joined: 08 Jul 2010, 05:10
Excell #'s

Post by OOQRA » 11 Jul 2010, 15:09

OK, I've searched and read through just about every thread in here, PM'ed several members, and still can't find an answer, so I'll ask here.

Is there an Excell rim and spoke set that will fit the standard CRM hubs? If so, does anyone know the part #'s or for what model and year bike it's for? I really need to buy a front and rear set.

Thanks.

Matt

wheelright
Site Supporter
Site Supporter
Reactions:
Posts: 60
Joined: 11 Jun 2010, 02:06
Bike Owned: crm mk2
Location: CHON BURI
Re: Excell #'s

Post by wheelright » 12 Jul 2010, 09:56

Recommended sizes for the CRM are the same as the jap spec XR250, 17x3.0 front and 17x3.50 rear, Excel do make these sizes and any off road dealer ought to be able to order them from Talon for you,the 32 hole rear is quite rare and may be special order,as a side note the 17x3.00 front is easy to get and the later transalp 750 have a 32 hole 17x3.50 rear rim if you can find one,
( but that will be a d.i.d )

User avatar
OOQRA
New kid on the block
New kid on the block
Reactions:
Posts: 5
Joined: 08 Jul 2010, 05:10
Re: Excell #'s

Post by OOQRA » 13 Jul 2010, 15:50

Thanks!


Post Reply