Madmanreevo's CRM Motard PIC's !!

User avatar
madmanreevo
Site Supporter
Site Supporter
Reactions:
Posts: 122
Joined: 03 Oct 2004, 19:46
Bike Owned: crm 2.2
Location: warrington Cheshire UK
Madmanreevo's CRM Motard PIC's !!

Post by madmanreevo » 14 May 2011, 10:58

Here is my CRM SM, with 2nd hand XR650 wheels (talon hubs, excel rims) some mods needed to fit.
:D
Attachments
12052011519  resized.jpg
3rd CRM250 MK2, rebuilt incl Braided hoses,powdercoated,one off bronze swingarm bushes,taper head bearings,hard chromed fork, poweredcoated rear spring and rebuilt. custom graphics, also own TL1000s, Aprillia RS250 (300 kit stage 3 tuned), Yamaha RD400c

User avatar
madmanreevo
Site Supporter
Site Supporter
Reactions:
Posts: 122
Joined: 03 Oct 2004, 19:46
Bike Owned: crm 2.2
Location: warrington Cheshire UK
Re: Madmanreevo's CRM Motard PIC's !!

Post by madmanreevo » 14 May 2011, 11:04

View from the other side 8-)
Attachments
12052011525  resized.jpg
3rd CRM250 MK2, rebuilt incl Braided hoses,powdercoated,one off bronze swingarm bushes,taper head bearings,hard chromed fork, poweredcoated rear spring and rebuilt. custom graphics, also own TL1000s, Aprillia RS250 (300 kit stage 3 tuned), Yamaha RD400c

twistednuts
Site Supporter
Site Supporter
Reactions:
Posts: 937
Joined: 07 Feb 2010, 00:37
Location: Lancashire
Re: Madmanreevo's CRM Motard PIC's !!

Post by twistednuts » 14 May 2011, 11:05

Looks smashin that fella. Only thing id change is the front mudguard. Shorter sm ones make the front end look sooo much neater.

Them wheels look very smart 8-)

User avatar
madmanreevo
Site Supporter
Site Supporter
Reactions:
Posts: 122
Joined: 03 Oct 2004, 19:46
Bike Owned: crm 2.2
Location: warrington Cheshire UK
Re: Madmanreevo's CRM Motard PIC's !!

Post by madmanreevo » 14 May 2011, 11:07

Rear end, went for gold O ring 520 chain, 42 rear sprocket runnig a 14 at front waiting for a 15 tooth.
Attachments
12052011516  resized.jpg
3rd CRM250 MK2, rebuilt incl Braided hoses,powdercoated,one off bronze swingarm bushes,taper head bearings,hard chromed fork, poweredcoated rear spring and rebuilt. custom graphics, also own TL1000s, Aprillia RS250 (300 kit stage 3 tuned), Yamaha RD400c

User avatar
madmanreevo
Site Supporter
Site Supporter
Reactions:
Posts: 122
Joined: 03 Oct 2004, 19:46
Bike Owned: crm 2.2
Location: warrington Cheshire UK
Re: Madmanreevo's CRM Motard PIC's !!

Post by madmanreevo » 14 May 2011, 11:08

Nicer rear than some women I know :OMG sticky Pirelli Diablo boots.
Attachments
12052011524  resized.jpg
3rd CRM250 MK2, rebuilt incl Braided hoses,powdercoated,one off bronze swingarm bushes,taper head bearings,hard chromed fork, poweredcoated rear spring and rebuilt. custom graphics, also own TL1000s, Aprillia RS250 (300 kit stage 3 tuned), Yamaha RD400c

User avatar
madmanreevo
Site Supporter
Site Supporter
Reactions:
Posts: 122
Joined: 03 Oct 2004, 19:46
Bike Owned: crm 2.2
Location: warrington Cheshire UK
Re: Madmanreevo's CRM Motard PIC's !!

Post by madmanreevo » 14 May 2011, 11:11

Yesterday fitted 320 front disc (not shown on pic's above as taken day before). :mrgreen:
Attachments
13052011529  resized.jpg
3rd CRM250 MK2, rebuilt incl Braided hoses,powdercoated,one off bronze swingarm bushes,taper head bearings,hard chromed fork, poweredcoated rear spring and rebuilt. custom graphics, also own TL1000s, Aprillia RS250 (300 kit stage 3 tuned), Yamaha RD400c

twistednuts
Site Supporter
Site Supporter
Reactions:
Posts: 937
Joined: 07 Feb 2010, 00:37
Location: Lancashire
Re: Madmanreevo's CRM Motard PIC's !!

Post by twistednuts » 14 May 2011, 11:14

Your bike makes me wish id done a better job of mine :roll: :lol:

I brush painted the frame like a cheapskate!! Ha, thought it would only be used off road so didnt bother much. But now its moto'd i could do to re-do it :o

Whats left to do on yours

User avatar
madmanreevo
Site Supporter
Site Supporter
Reactions:
Posts: 122
Joined: 03 Oct 2004, 19:46
Bike Owned: crm 2.2
Location: warrington Cheshire UK
Re: Madmanreevo's CRM Motard PIC's !!

Post by madmanreevo » 14 May 2011, 11:20

Cheers Twisted,......shorter front mudguard DOH :roll: knew i forgot something ;)
Was on my list to do ....been sooo busy, going IOM end of month in vito van with zx6r crm , girlfriend and my son.
Checking my van over noticed it needed driveshaft boots then bloody front strut spring went !! that was about 2/3 weeks ago and I still had to do a few jobs on zx6 and do the SM conversion...well Im skint now so I can live with the longer front mudguard for now :D

Left to do: basically all i need to do is strip topend at some point in the future clean and polish the ports check bore, maybe mod the airbox similar to knackered's put in aftermarket reeds and reed block.
3rd CRM250 MK2, rebuilt incl Braided hoses,powdercoated,one off bronze swingarm bushes,taper head bearings,hard chromed fork, poweredcoated rear spring and rebuilt. custom graphics, also own TL1000s, Aprillia RS250 (300 kit stage 3 tuned), Yamaha RD400c

User avatar
knackeredMk1
Super Moderator
Super Moderator
Reactions:
Posts: 4182
Joined: 03 Nov 2006, 17:41
Bike Owned: Modified Mk1
Re: Madmanreevo's CRM Motard PIC's !!

Post by knackeredMk1 » 14 May 2011, 11:32

Very tasty :!: :D .

User avatar
madmanreevo
Site Supporter
Site Supporter
Reactions:
Posts: 122
Joined: 03 Oct 2004, 19:46
Bike Owned: crm 2.2
Location: warrington Cheshire UK
Re: Madmanreevo's CRM Motard PIC's !!

Post by madmanreevo » 14 May 2011, 11:46

cheers knackered :BB :mrgreen:
3rd CRM250 MK2, rebuilt incl Braided hoses,powdercoated,one off bronze swingarm bushes,taper head bearings,hard chromed fork, poweredcoated rear spring and rebuilt. custom graphics, also own TL1000s, Aprillia RS250 (300 kit stage 3 tuned), Yamaha RD400c

User avatar
maciej_mi
Regular Visitor
Regular Visitor
Reactions:
Posts: 115
Joined: 12 Aug 2009, 11:20
Bike Owned: MK3
Location: POLAND
Re: Madmanreevo's CRM Motard PIC's !!

Post by maciej_mi » 12 Oct 2011, 14:53

madmanreevo. Do you have a problem with scrathing chain on tire, did you do a sprockets spacers, ?

User avatar
maciej_mi
Regular Visitor
Regular Visitor
Reactions:
Posts: 115
Joined: 12 Aug 2009, 11:20
Bike Owned: MK3
Location: POLAND
Re: Madmanreevo's CRM Motard PIC's !!

Post by maciej_mi » 30 Jan 2012, 19:28

Where you get it a fork guarda fitted to 17" wheel? Oem honda are too wide. And it's a problem with supermoto wheel.

User avatar
madmanreevo
Site Supporter
Site Supporter
Reactions:
Posts: 122
Joined: 03 Oct 2004, 19:46
Bike Owned: crm 2.2
Location: warrington Cheshire UK
Re: Madmanreevo's CRM Motard PIC's !!

Post by madmanreevo » 13 Feb 2012, 17:27

sorry havent been on a while im renovating a house to sell on......forkguards i shaped to fit, no problems with chain.
3rd CRM250 MK2, rebuilt incl Braided hoses,powdercoated,one off bronze swingarm bushes,taper head bearings,hard chromed fork, poweredcoated rear spring and rebuilt. custom graphics, also own TL1000s, Aprillia RS250 (300 kit stage 3 tuned), Yamaha RD400c

User avatar
maciej_mi
Regular Visitor
Regular Visitor
Reactions:
Posts: 115
Joined: 12 Aug 2009, 11:20
Bike Owned: MK3
Location: POLAND
Re: Madmanreevo's CRM Motard PIC's !!

Post by maciej_mi » 19 Jul 2012, 11:40

I have 4.00 inch and 150/60 metzeler mez03 tire. I hope she will not scratch. I bought OR chain. Please tell me how do you handle with a speedo on 17"?

User avatar
d13dkt
New kid on the block
New kid on the block
Reactions:
Posts: 9
Joined: 13 Jul 2012, 13:16
Re: Madmanreevo's CRM Motard PIC's !!

Post by d13dkt » 20 Jul 2012, 19:49

That looks the nuts, have you any idea what other wheels will fit, I.e. cbr400, a very good friend owns a bike breakers and I would
To see if I can change mine for very little cost.


Post Reply