Off i go again
Re: Off i go again
Oh I see, I hadn't read a great deal but it seemed as though most just accepted the forks were a bit soft.
I didn't realise aftermarket springs were available.
Either way, you can't argue with WP :D
I didn't realise aftermarket springs were available.
Either way, you can't argue with WP :D
-
- Super Moderator
- Reactions:
- Posts: 1027
- Joined: 12 Sep 2010, 10:48
- Bike Owned: KTM 200 exc
- Location: Derbyshire/Notts border
Re: Off i go again
or a rolling chassis with them fitted for the price of a fork service
Im thinking about a bike with more valves than a powervalve
-
- Super Moderator
- Reactions:
- Posts: 1027
- Joined: 12 Sep 2010, 10:48
- Bike Owned: KTM 200 exc
- Location: Derbyshire/Notts border
Re: Off i go again
the comparison between std inlet and the new one so the 35mm pwk can go on.
Std one is on the left with the tiny hole
Im thinking about a bike with more valves than a powervalve
-
- Super Moderator
- Reactions:
- Posts: 1027
- Joined: 12 Sep 2010, 10:48
- Bike Owned: KTM 200 exc
- Location: Derbyshire/Notts border
Re: Off i go again
it is a cr250 inlet ,im just showing the difference in size of the inlet
got the inlet and reedblock with boysen 2 stage reeds for less than the price of the reeds
got the inlet and reedblock with boysen 2 stage reeds for less than the price of the reeds
Im thinking about a bike with more valves than a powervalve
Re: Off i go again
best part is that the vforce3's line up perfectly with the inlet passage in the CR manifold, but dont line up with the CRM manifold.
as you can see if the pic, the cr one is off to the side a little :)
as you can see if the pic, the cr one is off to the side a little :)
Re: Off i go again
may not be of any use to you - but the 43mm wp forks (ktm exc any many others) fit straight into the crm yokes - no machining
-
- Super Moderator
- Reactions:
- Posts: 1027
- Joined: 12 Sep 2010, 10:48
- Bike Owned: KTM 200 exc
- Location: Derbyshire/Notts border
Re: Off i go again
cheers but the yokes are sorted with the bigger forks now, any ideas on the rear shock appreciated as long as they are cheaper than a hagon
Im thinking about a bike with more valves than a powervalve
-
- Super Moderator
- Reactions:
- Posts: 1027
- Joined: 12 Sep 2010, 10:48
- Bike Owned: KTM 200 exc
- Location: Derbyshire/Notts border
Re: Off i go again
front sorted , long range tank fitted , carb ,inlet and reedblock fitted
and the bike runs like a bag of s**t
rejetting time or std carb back on for now
and the bike runs like a bag of s**t
rejetting time or std carb back on for now
Im thinking about a bike with more valves than a powervalve