Yeah, was thinkin the same

I thought he was just gonna put a back rack on

Having problems bleeding brakes.

I managed to get some pressure into the front and then zip tied the lever back to the bars to pressurise the system. Left for 2 days and now pressure is good.

I just can't get any pressure into the rear though. Got the fluid going though and sucking from the slave cylinder end, but absolutley no pressure on the pedal . Spent about 2 hours on this. It was really difficult on the other bike as well but I had done it by this time................

Try just pressing the pedal gently, with bleed nipple tight, but fluid res top off. Press slightly an keep it in one position for a bit.

I find when doing this that tiny bubbles come back into the res. Then it seems to create enough pressure to bleed via the nipple

Can John help? ;)

John is the front brake boss, not sure how he is with rears

im going to refrain from swearing as im more mature than you fudgers

Don't need John's help anyway .

I took the caliper off the back and held it up so the brake line went vertical. This seemed to clear the air and the back brake now works .

back off road wrote:lightly modded maybe this one needs a new title like jerams

Its gone serious because he's just realized that he needs to pull his socks up if he wants sticky status too LOL

Looking good mate

This version will never make a 'Sticky' as it's a copy. A sister to the first Mk1 if you will .........

Only seat to go and some setting up -

Deep down i think you want to sell that bike to me for a bargain price.

Dont fight the feelin

twisted trying his excellent powers of persuasion yet again

Scuse me Mrs Knackered, can your Steve come out and play on his new bike please? We promise we'll look after him and not break him , well not much .
Mike

but the large number plate may get broken , legal yes practical no