Nearly done

Post Reply
Simonypvs
Site Supporter
Site Supporter
Reactions:
Posts: 35
Joined: 08 Jul 2012, 15:46
Nearly done

Post by Simonypvs » 04 Aug 2012, 17:33

Just thought I would pop up some photos of my AR.

http://i35.photobucket.com/albums/d155/ ... f224b7.jpg

Simonypvs
Site Supporter
Site Supporter
Reactions:
Posts: 35
Joined: 08 Jul 2012, 15:46
Re: Nearly done

Post by Simonypvs » 06 Aug 2012, 09:34

Few more photos of the bike, tried posting this up yesterday using my phone but it all went a bit pete tong

[IMG]http://i35.photobucket.com/albums/d155/ ... f224b7.jpg[/IMG]

[IMG]http://i35.photobucket.com/albums/d155/ ... 3becc4.jpg[/IMG]

[IMG]http://i35.photobucket.com/albums/d155/ ... 4210b0.jpg[/IMG]

[IMG]http://i35.photobucket.com/albums/d155/ ... c75cdf.jpg[/IMG]

[IMG]http://i35.photobucket.com/albums/d155/ ... f4bd96.jpg[/IMG]

[IMG]http://i35.photobucket.com/albums/d155/ ... 7d3f0c.jpg[/IMG]

This is the master cylinder that I am using which was on one of my old bikes

[IMG]http://i35.photobucket.com/albums/d155/ ... d5d350.jpg[/IMG]

I am getting a mate to knock up a spacer and I have ordered a fresh chain as the one that is fitted has more tight spots than a thing that has a load of tight spots in it!!

All the best


Simon

User avatar
BaNZ
New kid on the block
New kid on the block
Reactions:
Posts: 41
Joined: 23 Jun 2011, 13:23
Bike Owned: CRM250-MK2 '93
Location: Vladivostok, Russia
Contact:
Re: Nearly done

Post by BaNZ » 09 Aug 2012, 03:39

I suggest you to install black headlamp plastic, but white rear fender. Or black both.

Is it original AR fork? And what wheels do you have? From what I can see, these seems to be from some CR.

Simonypvs
Site Supporter
Site Supporter
Reactions:
Posts: 35
Joined: 08 Jul 2012, 15:46
Re: Nearly done

Post by Simonypvs » 09 Aug 2012, 12:56

Agree,

This arrived yesterday,

Image

Many thanks to my son, this photo is all over Facebook

Simonypvs
Site Supporter
Site Supporter
Reactions:
Posts: 35
Joined: 08 Jul 2012, 15:46
Re: Nearly done

Post by Simonypvs » 09 Aug 2012, 12:58

The forks are original AR and the wheels are from an XR400

The rear goes straight in, the frot needed an 11mm spacer making up so it was pretty straight forward conversion

User avatar
BaNZ
New kid on the block
New kid on the block
Reactions:
Posts: 41
Joined: 23 Jun 2011, 13:23
Bike Owned: CRM250-MK2 '93
Location: Vladivostok, Russia
Contact:
Re: Nearly done

Post by BaNZ » 09 Aug 2012, 15:18

Okay, I see, where did you order wheels?

In my case I need front from CR, rear from XR. Doubt somebody sells such sets, he-he. Gotta figure up something here.

User avatar
BaNZ
New kid on the block
New kid on the block
Reactions:
Posts: 41
Joined: 23 Jun 2011, 13:23
Bike Owned: CRM250-MK2 '93
Location: Vladivostok, Russia
Contact:
Re: Nearly done

Post by BaNZ » 09 Aug 2012, 15:24

[quote="Simonypvs"]Agree,

This arrived yesterday,

Many thanks to my son, this photo is all over Facebook[/quote]

Oh! Could you, please, make me pictures if this headlight fits on original headlight's mounts?

Something similar comes my way, but with single lens and turn signals.

Simonypvs
Site Supporter
Site Supporter
Reactions:
Posts: 35
Joined: 08 Jul 2012, 15:46
Re: Nearly done

Post by Simonypvs » 09 Aug 2012, 20:32

Got the wheels second hand, they were really cheap. You may need to get them one at a time from eBay or if you want to spend a load of money talon uk can make you a set

User avatar
maciej_mi
Regular Visitor
Regular Visitor
Reactions:
Posts: 115
Joined: 12 Aug 2009, 11:20
Bike Owned: MK3
Location: POLAND
Re: Nearly done

Post by maciej_mi » 23 Aug 2012, 18:14

I have a question about front wheel. What is the distance between the widest part of the rubber (left or right) and fork legs (the biger pipe). Becouse mine is touching a little when absorb (brake disc side).

User avatar
maciej_mi
Regular Visitor
Regular Visitor
Reactions:
Posts: 115
Joined: 12 Aug 2009, 11:20
Bike Owned: MK3
Location: POLAND
Re: Nearly done

Post by maciej_mi » 18 Apr 2013, 20:41

??


Post Reply