Arj256 - Mk2 Restoration

User avatar
knackeredMk1
Super Moderator
Super Moderator
Reactions:
Posts: 4182
Joined: 03 Nov 2006, 17:41
Bike Owned: Modified Mk1
Re: Arj256 - Mk2 Restoration

Post by knackeredMk1 » 28 Oct 2013, 22:34

Two pin plug under the tank - Oil level sensor?

Three pin - Side stand. One pin - Thermostat.

Looking very good :) ................

fallenmikethebike
NWAA Supporter
NWAA Supporter
Reactions:
Posts: 3520
Joined: 02 Dec 2007, 16:02
Bike Owned: MK3
Location: Mid Surrey
Re: Arj256 - Mk2 Restoration

Post by fallenmikethebike » 29 Oct 2013, 08:11

Tidy looking MK2 for sale shortly then :?: ;) +1 to Steve's comment.
Mike
VFORCE REEDS-MUGEN HEAD AND BARREL-WHITE POWER-ALL ON MY WISH LIST!!

andrew19
Site Supporter
Site Supporter
Reactions:
Posts: 121
Joined: 02 Oct 2011, 23:07
Bike Owned: 250 MK3
Location: Swansea
Re: Arj256 - Mk2 Restoration

Post by andrew19 » 29 Oct 2013, 22:24

Makes for interesting reading and will no doubt spur me on to overhauling one of my Mk3s
Looking forward to seeing photos of the finished article.

User avatar
helisupp
NWAA Supporter
NWAA Supporter
Reactions:
Posts: 744
Joined: 12 Apr 2012, 21:57
Bike Owned: CRM AR (4)
Location: Gloucester
Re: Arj256 - Mk2 Restoration

Post by helisupp » 30 Oct 2013, 09:05

The cost of refurbishing a bike that looks complete and in good condition costs just as much as refurbishing a bike in bad condition.

If you start at the front wheel and finish at the back wheel, replacing all bearings, seals, top end, gaskets, exhausts system, repaint and refurb of rest of bike etc, the costs really do mount up.

I think some bikes are stripped for a minor refresh, and when they see the cost of suspension and swingarm bearings, top end kit, exhaust, stickers, and scores of other items the cost is prohibitive and the bike gets dismantled for parts.

Not a bad thing as I purchased a complete swingarm and suspension linkages on ebay for £35, included new swingarm bearings in a honda packet.

The bearings would have cost me £100 from a dealer.

User avatar
Sean91
Regular Visitor
Regular Visitor
Reactions:
Posts: 149
Joined: 30 Nov 2015, 19:36
Re: Arj256 - Mk2 Restoration

Post by Sean91 » 02 Dec 2015, 23:18

I was just wondering, where i have an oil sensor on my frame, you just have a bolt blanking the hole and i didnt see a picture of the sensor fitted before the seat went on. My question is do you have the sensor removed? Because they do tend to leak oil and in the past mine has been no different. Mine has been resealed with silicone but i expect itll leak again one day. I wonder if there is a way around this

Sean

User avatar
jompy
Forum Ghost
Forum Ghost
Reactions:
Posts: 493
Joined: 03 Jul 2012, 19:55
Bike Owned: MK2
Location: Derby
Re: Arj256 - Mk2 Restoration

Post by jompy » 03 Dec 2015, 10:07

They usually leak where the wires come out the bung & not from around the edges

User avatar
Sean91
Regular Visitor
Regular Visitor
Reactions:
Posts: 149
Joined: 30 Nov 2015, 19:36
Re: Arj256 - Mk2 Restoration

Post by Sean91 » 03 Dec 2015, 10:11

jompy wrote:They usually leak where the wires come out the bung & not from around the edges
the bung itself was loose on mine and it was dripping oil from where it wasnt tight in the frame, i resealed it with silicone when i bought the bike and it hasnt been a problem since. i dont know how long that will last though, could be ten years, could be ten weeks

sean

User avatar
jompy
Forum Ghost
Forum Ghost
Reactions:
Posts: 493
Joined: 03 Jul 2012, 19:55
Bike Owned: MK2
Location: Derby
Re: Arj256 - Mk2 Restoration

Post by jompy » 03 Dec 2015, 17:58

Well lets hope it lasts as they're £45 new as mine was leaking from the wires , i tried to take the bung out knowing i'd probably break it & i didn't disappoint :lol:

User avatar
davecee92
Visitor
Visitor
Reactions:
Posts: 52
Joined: 01 Aug 2015, 08:43
Re: Arj256 - Mk2 Restoration

Post by davecee92 » 15 Apr 2016, 20:45

Sorry to revive an old thread but i just noticed this is my bike lol i knew she was well taken care of but im glad to see the quality of the work done , sadly the exhhaust blew causing the top end to go with under 500 miles on it. The wheels also were beyond use when i went to replace the tyres so i had the wheels rebuilt with gold sm pro rims , gold powdercoated hubs and stainless spokes. I have replaced the full exhaust with a dep system but i want to have the fmf pipe repaired if possible as it felt like it made more power. She will now be getting a full engine rebuild to keep her alive.

User avatar
jompy
Forum Ghost
Forum Ghost
Reactions:
Posts: 493
Joined: 03 Jul 2012, 19:55
Bike Owned: MK2
Location: Derby
Re: Arj256 - Mk2 Restoration

Post by jompy » 20 Apr 2016, 21:52

Nice find bud :)


Post Reply