Page 10 of 11
Re: 1991 MK2 CRM Supermoto Project
Posted: 13 Mar 2016, 21:49
by Sean91
thought id try doing a 'colour splash' picture...
Re: 1991 MK2 CRM Supermoto Project
Posted: 14 Mar 2016, 21:51
by andrew19
Looking good
Re: 1991 MK2 CRM Supermoto Project
Posted: 18 Mar 2016, 17:40
by Sean91
18/03/16: I repainted the exhaust pipe again using VHT flameproof paint this time, but doing it properly with primer and curing in between coats. The paint apparently withstands upto 1100 degree (centegrade) heat but the the useless sh!t lasted a matter of days before it started to bubble up and flake on the header
The paint on the silencer held up nicely though due to the lack of heat towards the rear, but i gave up on the front pipe and spent 200 quid on a shiny new DEP one! thank you leisure trail
Re: 1991 MK2 CRM Supermoto Project
Posted: 18 Mar 2016, 21:13
by jompy
Mmmmmm shinny
Re: 1991 MK2 CRM Supermoto Project
Posted: 06 Apr 2016, 21:02
by Sean91
ive pulled some more bits off the bike recently for tidying up...
i had the sprocket guard powdercoated gloss black
and the RC cover, B&A
the oil cap thingy was starting to rust so i had that done as well
Re: 1991 MK2 CRM Supermoto Project
Posted: 06 Apr 2016, 21:03
by Sean91
the brake and gear pedals were starting to look worse for wear, they were raw uncoated steel so i painted them a while ago with chrome spray paint. it done the job for a while but wasnt really sufficient. the gear lever also had to be hammered back into shape
gloss black again
the generator cover looked 'OK, ish from a distance but it was starting to discolour like a 20 year old SNES
some sanding and a few coats of plastic primer/satin black later...
i also bought some stainless rear wheel cams as mine are starting to flake and rust again. these are from the original honda africa twin but i see no reason why they shouldnt fit
new sump and exhaust protectors
Re: 1991 MK2 CRM Supermoto Project
Posted: 07 Apr 2016, 20:41
by jompy
Some nicely sorted bits n bobs
Re: 1991 MK2 CRM Supermoto Project
Posted: 11 Apr 2016, 18:43
by Sean91
Re: 1991 MK2 CRM Supermoto Project
Posted: 20 Apr 2016, 21:43
by jompy
Yep those DEPs have a lovely ring-a-ding-ding sound
Re: 1991 MK2 CRM Supermoto Project
Posted: 22 Apr 2016, 12:30
by Sean91
jompy wrote:Yep those DEPs have a lovely ring-a-ding-ding sound
they sure do, it sounds more 'two strokey' now... Hopefully it should improve performance a little as well
Re: 1991 MK2 CRM Supermoto Project
Posted: 23 May 2016, 21:27
by Sean91
23/5/16
The wheels were the last part of the bike i wanted to change, and they turned out to be a long process so they got left until last. the red wheels looked ok in the pictures but they had started to fade, the rear being worse than the front, and the spokes were a mess. After looking at the bike in person you would say the wheels let the bike down.
i had the rims shot blasted and powdercoated gloss black by the same guy who did my rear sub frame.
the spoke wraps i bought months ago were used because they could be slid onto the ends of the spokes
Re: 1991 MK2 CRM Supermoto Project
Posted: 26 May 2016, 21:17
by jim157
Came out really nice in the end. Good work!
Re: 1991 MK2 CRM Supermoto Project
Posted: 30 May 2016, 21:54
by jompy
those wheels in black look much better , very nice
thats a really nice mk1 escort too
Re: 1991 MK2 CRM Supermoto Project
Posted: 31 May 2016, 05:08
by Speeddevice
Looks fantastic. I'm a big fan of black wheels and black frames.
The escort looks tidy too.