Paddy in NZ
Paddy in NZ
Hi All,
Irishman in New Zealand rebuilding 1993 crm250. Having trouble getting needle/roller bearings for crankshaft. Loving the build.
Talk soon
Conor
Sent from my iPad using Tapatalk
Irishman in New Zealand rebuilding 1993 crm250. Having trouble getting needle/roller bearings for crankshaft. Loving the build.
Talk soon
Conor
Sent from my iPad using Tapatalk
-
xstian81
- NWAA Supporter
- Reactions:
- Posts: 169
- Joined: 06 Aug 2014, 15:02
- Bike Owned: Mk3 CRM
- Location: Norfolk
Re: Paddy in NZ
Hi Conor,
Do you mean the big end bearing?
There's some info here about cranks.
viewtopic.php?f=20&t=5267
Looks like you can't get that bearing from Honda, just the whole crankshaft, if there are any left.
Do you mean the big end bearing?
There's some info here about cranks.
viewtopic.php?f=20&t=5267
Looks like you can't get that bearing from Honda, just the whole crankshaft, if there are any left.
Re: Paddy in NZ
Thanks man. Interesting reading. I’ll keep searching. There are places in the States and Ukraine that seem to have some.
Re: Paddy in NZ
Hi all,
Looking for one of these: 91005-KAE-741. It’s a balancer shaft bearing. Honda don’t do them anymore. Any help would be great.
Cheers
Conor
Sent from my iPad using Tapatalk
Looking for one of these: 91005-KAE-741. It’s a balancer shaft bearing. Honda don’t do them anymore. Any help would be great.
Cheers
Conor
Sent from my iPad using Tapatalk
-
knackeredMk1
- Super Moderator
- Reactions:
- Posts: 4185
- Joined: 03 Nov 2006, 17:41
- Bike Owned: Modified Mk1
Re: Paddy in NZ
You probably need to talk to an engineer. Some owners have had the worn part on the balancer shaft sleeved which then allows for a different (more available) bearing to be used.
viewtopic.php?f=20&t=5536
viewtopic.php?f=20&t=5536
Re: Paddy in NZ
Ok. I’ll give that a go. Cheers