Hello from new member....

If a new member, introduce yourselves here, maybe even a pic of your bike.
Post Reply
User avatar
maxhouse
New kid on the block
New kid on the block
Reactions:
Posts: 7
Joined: 03 Jan 2018, 19:57
Hello from new member....

Post by maxhouse » 23 Jan 2018, 10:52

Hi CMR'ers!

Just wanted to say hi.

I am in the process of rebuilding my CRM AR.

It came to me looking like this....
https://photos.app.goo.gl/VSEURbv4Hd89mWa72

Within 24 hours it looked like this...
https://photos.app.goo.gl/Chriko2yDhyyVqL32

I have had the frame/subframe powder coated, stuck the carb in the ultrasonic bath, restored and re-wrapped the loom, replaced bearings where necessary, sent all original fasteners off for replating and now in the process of rebuilding the forks and shock.

Other than a good clean and spruce up, I've left the engine alone for now as it seemed to run fine.

The re-build, starts soon. I'm sure i will have questions for you all.

Thanks,
Max

PS - apologies for the image links, i could not get GooglePhotos links to preview properly!

User avatar
rc46
New kid on the block
New kid on the block
Reactions:
Posts: 17
Joined: 19 Nov 2014, 14:30
Re: Hello from new member....

Post by rc46 » 23 Jan 2018, 11:28

Nice, wellcome

gregorious77
NWAA Supporter
NWAA Supporter
Reactions:
Posts: 615
Joined: 03 Jan 2014, 20:37
Re: Hello from new member....

Post by gregorious77 » 23 Jan 2018, 22:16

good luck and enjoy

User avatar
Gammakeith
Regular Visitor
Regular Visitor
Reactions:
Posts: 115
Joined: 14 Feb 2010, 18:03
Re: Hello from new member....

Post by Gammakeith » 24 Jan 2018, 16:07

Welcome! MY AR is patiently waiting its turn for the same treatment 8-) My frame is certainly rustier than yours!

Keith


Post Reply