Hi, CRM fans (sorry for my English, I know it is under the basic level)

Before few years I was start dreaming for CRM 250. Then I ride soft enduro with my lovely XL200 (83') , but in 2018 starting in our hard enduro championship and then I realize to need a some better HONDA motorcycle .

Last year I bought CRM 250 , racing in championship, make my skills better , but CRM after every riding goes slowly and slowly. 31.12.2019 was the final riding before engine rebuild, compression was 4,5bar , clearance between piston and cylinder was 0,3mm . I change piston with AHL chinesse , I bought reeed Vforce3 ,compression ratio up to 7,8:1 (may be) - manometer show 9bar . I running with CDI for 2t Peugeot scooter and powervalve moving with cable for oil pump (use a premix gas). And from few weeks I love my CRM250 even more - great powerband and great handling. Tractorbility is ON

Finally, I'm glad to show you a video from yesterday:
https://www.youtube.com/watch?v=UPc6ykiqEEE

In beginning of this march , I bought another Honda , but this is not yet a story (Honda CRE 250 99' in rebuild proces)

And some phtotos…i hope are visible (if they not, please, write me a free host) :
https://photos.app.goo.gl/3qfQLBE1kU7FyMhR7

Nice video. The CRM sounds like it is running lovely now. Well done!

Keith

Good to be using a CRM in competition. CRE will be a completely different animal!!

Hi to everyone

In a last months, happend few things - I broке a AHL piston, fuel is over on 6th gear and 80% throttle ... Now, I use a Wossner at 67,5mm , 10bar compression. Before few weeks, I bought second CRM250, for parts - there was Procircuit expander chamber, seat with new cover and good rear shock absorber. Changed the rear fender, now is Yamaha YZ white .

And in our country, this weekend started the Bulgarian Hard Enduro championship and I was there. Some mistakes prevented me for good ranking (may be 5th place in navigation) ... rear inner tube is fail, loosing over a 40min... 11 from 27 finished in my class. In Endurocross - 8 from 16.

Enjoy the video
https://www.youtube.com/watch?v=KzY1SRQhtV0

P.S. Can I send to someone photo and upload in server visible for more country ?

Very nice. Would you mind Sharing some information about your cdi setup and rc valve cable? Very interesting.

My mk2 is missing the servo is rigged up with the throttle cable, however the Peugeot CDI is interesting, please do share.