Mark 1 electrical help pleeeaaassseee.....
Posted: 05 Oct 2020, 18:20
Hello fellow CRM ers. Getting back into bikes after years off...Grew up with them and want to relive my youth so I finally caved-in and bought a crm mk1 some time ago. Non runner but good nick. I really did not expect such trouble finding info and parts so i am appealing to anyones good nature to help a fellow bike lover.
At the moment i just need help finding where some cables should go. After that i will see why there is no spark.(mission 2)
I would genuinely appreciate any help someone will give me as this means looking at there own bike to see where things go and then
sharing that info. I will pay for this info or donate to a charity.....Anything to help me complete this mission. I will not give up, ever!
(Unless something good comes onto netflix).
So, for the start,
Black cable and green cable with yellow stripe from box connector behind headlight. Goes nowhere.
Black cable and green cable from behind light... green goes to instruments. Black from loom to nowhere.
Single orange cable behind headlight goes nowhere (female)
Single green cable with double head goes nowhere (female)
Under tank from loom. Small connector block. Green cable and a green with red stripe. Has nothing connected to it. Just two small spade ends.
Is ignition coil wiring black with yellow stripe to black terminal on coil and green cable to what looks like blue green on ignition coil? Assuming they are correct cables to the coi in the first place....
Light green and dark green spade connectors under Rad. Are they horn?
Green connector block (with 3 cables) from loom under saddle has yellow and black stripe, green with white stripe and green.
This goes nowhere but the yellow black has been cut and the other 2 looped together.
Thanks in advance!
At the moment i just need help finding where some cables should go. After that i will see why there is no spark.(mission 2)
I would genuinely appreciate any help someone will give me as this means looking at there own bike to see where things go and then
sharing that info. I will pay for this info or donate to a charity.....Anything to help me complete this mission. I will not give up, ever!
(Unless something good comes onto netflix).
So, for the start,
Black cable and green cable with yellow stripe from box connector behind headlight. Goes nowhere.
Black cable and green cable from behind light... green goes to instruments. Black from loom to nowhere.
Single orange cable behind headlight goes nowhere (female)
Single green cable with double head goes nowhere (female)
Under tank from loom. Small connector block. Green cable and a green with red stripe. Has nothing connected to it. Just two small spade ends.
Is ignition coil wiring black with yellow stripe to black terminal on coil and green cable to what looks like blue green on ignition coil? Assuming they are correct cables to the coi in the first place....
Light green and dark green spade connectors under Rad. Are they horn?
Green connector block (with 3 cables) from loom under saddle has yellow and black stripe, green with white stripe and green.
This goes nowhere but the yellow black has been cut and the other 2 looped together.
Thanks in advance!