Spot the DOG

Only Site supporters can create new posts in this section. A section to display all your bikes, and biking history. Feel free to share your history here and picture whoring. This section is not 56K friendly, let alone 2mb broadband friendly either.
User avatar
abigsupermoto
Site Supporter
Site Supporter
Reactions:
Posts: 240
Joined: 23 Apr 2006, 20:53
Bike Owned: MK3 CRM
Location: Wirral
Spot the DOG

Post by abigsupermoto » 09 May 2010, 10:50

I, as some may remember had a MK2 which I liked, but I sold it to help set myself up in buisness and slowly have been saving to get myself another CRM, I recently bought a MK3 off e-bay, It looked a bit rough but thought it would be something for me to have a play with. heastock bearings were shot as were the fork seals, so whilst the front end was off I thought it would be best to carry on and strip the whole bike, and start from scratch.
as with most of these bikes the swingarm pivot was seized solid, but with help from a fine member of this forum, I was put in touch with a guy with a big machine and the know how of persuading it out of my frame.
So this is how it is now, I intend to have the frame/swingarm powder coated and then start the rebuild as time and funds allow, If it turns out half as good as Knackered's I will be happy.
here is a pic of the frame/swingarm, and my dog (although she isnt called spot) can you tell the difference? between one dog and another?
Attachments
DOG.jpg

fallenmikethebike
NWAA Supporter
NWAA Supporter
Reactions:
Posts: 3520
Joined: 02 Dec 2007, 16:02
Bike Owned: MK3
Location: Mid Surrey
Re: Spot the DOG

Post by fallenmikethebike » 09 May 2010, 11:21

:D Well, of all the MK,s to be considered worthy of a nuts and bolts rebuild the MK3 is probably the best investment ;) .
When I see the cost of those ECU,s I'm thankful were not in the "premier league" ;) :lol:
I'm sure you'll do it more than justice, and look forward to your speedy return.
In these testing times, it's a brave man that starts up a new enterprise, all the very best of luck with it.
Mike
VFORCE REEDS-MUGEN HEAD AND BARREL-WHITE POWER-ALL ON MY WISH LIST!!

User avatar
SkidMark
Site Supporter
Site Supporter
Reactions:
Posts: 810
Joined: 19 Jan 2007, 18:38
Location: Uganda
Contact:
Re: Spot the DOG

Post by SkidMark » 09 May 2010, 11:23

err one is white and the others black... :roll:
AR's rock!!!
TwinAir filter, Braided Brake Hoses, Swingarm/Shock bearings done!, Rear Shock overhauled and customised by G-Force, 14-44 Gearing, Exhaust decoked (fun with Caustic Soda!), DEP silencer.

CR Mmmmm
Site Supporter
Site Supporter
Reactions:
Posts: 164
Joined: 18 Feb 2009, 19:02
Bike Owned: AR
Location: Nr Newbury, Berks.
Re: Spot the DOG

Post by CR Mmmmm » 09 May 2010, 11:24

Says the man who dropped from "The Premiership" straight into Div 3. ;) ;)

User avatar
knackeredMk1
Super Moderator
Super Moderator
Reactions:
Posts: 4182
Joined: 03 Nov 2006, 17:41
Bike Owned: Modified Mk1
Re: Spot the DOG

Post by knackeredMk1 » 09 May 2010, 11:28

Good luck in your business enterprise.

You've got the right bike.

3rd division prices - All new Mugen plastics http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... K:MEWAX:IT + http://cgi.ebay.co.uk/Honda-CRM-250R-Mu ... 3357a508dc ;) .

fallenmikethebike
NWAA Supporter
NWAA Supporter
Reactions:
Posts: 3520
Joined: 02 Dec 2007, 16:02
Bike Owned: MK3
Location: Mid Surrey
Re: Spot the DOG

Post by fallenmikethebike » 09 May 2010, 11:32

:D It's no use you trying to induce me back into the atomic red camp,with tempting offers.
Mike
VFORCE REEDS-MUGEN HEAD AND BARREL-WHITE POWER-ALL ON MY WISH LIST!!

User avatar
knackeredMk1
Super Moderator
Super Moderator
Reactions:
Posts: 4182
Joined: 03 Nov 2006, 17:41
Bike Owned: Modified Mk1
Re: Spot the DOG

Post by knackeredMk1 » 09 May 2010, 11:36

I've got to stop this ..... I feel like I'm becoming a dodgey cheap plastics and ECU salesman :oops: .

User avatar
SkidMark
Site Supporter
Site Supporter
Reactions:
Posts: 810
Joined: 19 Jan 2007, 18:38
Location: Uganda
Contact:
Re: Spot the DOG

Post by SkidMark » 09 May 2010, 11:50

knackeredMk1 wrote:I've got to stop this ..... I feel like I'm becoming a dodgey cheap plastics and ECU salesman :oops: .
ahh the truth comes out - he is trying to get us to buy dodgy goods... ;)
AR's rock!!!
TwinAir filter, Braided Brake Hoses, Swingarm/Shock bearings done!, Rear Shock overhauled and customised by G-Force, 14-44 Gearing, Exhaust decoked (fun with Caustic Soda!), DEP silencer.

User avatar
knackeredMk1
Super Moderator
Super Moderator
Reactions:
Posts: 4182
Joined: 03 Nov 2006, 17:41
Bike Owned: Modified Mk1
Re: Spot the DOG

Post by knackeredMk1 » 09 May 2010, 11:52

I'll re word that :roll: - I've got to stop this ..... I feel like I'm becoming a dodgey salesman of cheap plastics and ECUs :oops: :oops: :oops: .


;)

fallenmikethebike
NWAA Supporter
NWAA Supporter
Reactions:
Posts: 3520
Joined: 02 Dec 2007, 16:02
Bike Owned: MK3
Location: Mid Surrey
Re: Spot the DOG

Post by fallenmikethebike » 09 May 2010, 17:36

knackeredMk1 wrote:I've got to stop this ..... I feel like I'm becoming a dodgey cheap plastics and ECU salesman :oops: .
Freudian slip methinks, I bet your favourite movie's Tinmen, With Danny Devito.
Mike
VFORCE REEDS-MUGEN HEAD AND BARREL-WHITE POWER-ALL ON MY WISH LIST!!

User avatar
abigsupermoto
Site Supporter
Site Supporter
Reactions:
Posts: 240
Joined: 23 Apr 2006, 20:53
Bike Owned: MK3 CRM
Location: Wirral
Re: Spot the DOG

Post by abigsupermoto » 09 May 2010, 18:04

knackeredMk1 wrote:Good luck in your business enterprise.

You've got the right bike.

3rd division prices - All new Mugen plastics http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... K:MEWAX:IT + http://cgi.ebay.co.uk/Honda-CRM-250R-Mu ... 3357a508dc ;) .
I could do with new plastics, though not sure on the flo orange/pink :shock:

User avatar
knackeredMk1
Super Moderator
Super Moderator
Reactions:
Posts: 4182
Joined: 03 Nov 2006, 17:41
Bike Owned: Modified Mk1
Re: Spot the DOG

Post by knackeredMk1 » 09 May 2010, 18:29

I must admit my farourite bike was a GasGas EC 250 that was almost the exact colour of the Mugen plastics. I do like the colour. If I had a Mk3 I'd snap them up. I'd also get called a lot of names :roll: .

Image

User avatar
abigsupermoto
Site Supporter
Site Supporter
Reactions:
Posts: 240
Joined: 23 Apr 2006, 20:53
Bike Owned: MK3 CRM
Location: Wirral
Re: Spot the DOG

Post by abigsupermoto » 09 May 2010, 19:09

i have been thinking about it, and trying to imagine what they would look like with a satin black frame/swingarm
and I like the look of this too.....
Attachments
MUGEN_CRM250AR.jpg

User avatar
delvey91
Site Supporter
Site Supporter
Reactions:
Posts: 159
Joined: 24 Oct 2009, 18:29
Location: Crediton, Devon
Contact:
Re: Spot the DOG

Post by delvey91 » 09 May 2010, 21:09

omg i love it :o
99 HONDA CRM250 AR MUGEN
KTM EXC 380 1998 SUPERMOTO 07 SPEC
KTM 525 EXC SUPERMOTO 05

User avatar
abigsupermoto
Site Supporter
Site Supporter
Reactions:
Posts: 240
Joined: 23 Apr 2006, 20:53
Bike Owned: MK3 CRM
Location: Wirral
Re: Spot the DOG

Post by abigsupermoto » 09 May 2010, 23:44

delvey91 wrote:omg i love it :o
you could make yours look like that, and sell me your plastics to offset the cost a bit :mrgreen:


Post Reply