Does anyone happen to know the bolt sizes for the rear sprockets . Previous owner put some titanium ones in and you can't tighten them until they stop spinning almost seems like they're stretching as you try to do them up so thought I'd at least try something else and see if they tighten up properly.

Plenty on ebay, (honda sprocket bolts/ cw nuts) they're m8x1.25 thread, depends on the sprocket you're running too, as some are countersunk some have flat base

777amia wrote: ↑

19 Sep 2021, 18:25

Plenty on ebay, (honda sprocket bolts/ cw nuts) they're m8x1.25 thread, depends on the sprocket you're running too, as some are countersunk some have flat base

Brilliant ... cheers for that it was the sizing I needed

No worries, they're 30mm (countersunk)