mot pass.......

Post Reply
voodookid37
Site Supporter
Site Supporter
Reactions:
Posts: 236
Joined: 14 Feb 2010, 19:23
Bike Owned: mk1
Location: ecosse
Contact:
mot pass.......

Post by voodookid37 » 30 Jun 2010, 10:27

took the old un' up for it's yearly today. ...........and passed :D .

here is what i did in the hope it might help others....

having read on here that the beam pattern is questionable....."but most testers will pass it".i opted to do a daytime mot.

so......
masked all the lights off inc indi's
masked switch(left horn button clear)
visible reflector
chain guard off..........checked again told doesn,t come into it ??
rear pegs left on.........wasn,t sure here !!
speedo visible.

usual checks..bearings,wheels inline,brakes,general contruction, fuel cap secure etc etc..

isn,t duct tape wonderful......... :BB
mk1... with mk2.2 engine,running mk1 electrics,mk1 carb on standard mk1 jetting + settings.dep front pipe.jap alloy can of unknown make. twinair filter on plastic cage.l/h mk1 rad.r/h mk2 (extra coolant takeoff on 2.2 head)
xr650 wheels .gritty front,mitas rear


Post Reply