powder coaters....
-
voodookid37
- Site Supporter
- Reactions:
- Posts: 236
- Joined: 14 Feb 2010, 19:23
- Bike Owned: mk1
- Location: ecosse
- Contact:
powder coaters....
thinking or ripping the old fella apart and getting the frame and brackets powder coated...
now i have a guy up here that does a good job, but sometimes its just a bit too thick and industrial...
who out there are the rated "coaters"......please include,finish,turn around time etc .
i,m looking at a finish as near as possible to mk1 red.........
your thoughts please lads and lassies....
now i have a guy up here that does a good job, but sometimes its just a bit too thick and industrial...
who out there are the rated "coaters"......please include,finish,turn around time etc .
i,m looking at a finish as near as possible to mk1 red.........
your thoughts please lads and lassies....
mk1... with mk2.2 engine,running mk1 electrics,mk1 carb on standard mk1 jetting + settings.dep front pipe.jap alloy can of unknown make. twinair filter on plastic cage.l/h mk1 rad.r/h mk2 (extra coolant takeoff on 2.2 head)
xr650 wheels .gritty front,mitas rear
xr650 wheels .gritty front,mitas rear
Re: powder coaters....
have a look at city powder coaters. my bro and a few mates have use them for cars wheels 20 popund each and they were mint. there are a few bad comments on net about them but way overided by all the excellent feedback. for a bike frame dipped sandblasted and coated is £50 wheels 20 and things like swingarm £5 they do all parts and in many colours. check them out at http://www.citypowdercoating.co.uk/ hope this can help :) oh and they dropped the wheels of 1 weekend and picked up next as was far away. but it takes a couple of days.
-
madmanreevo
- Site Supporter
- Reactions:
- Posts: 122
- Joined: 03 Oct 2004, 19:46
- Bike Owned: crm 2.2
- Location: warrington Cheshire UK
Re: powder coaters....
Elite Engineering & Powder Coatings
Heysham Road, Bootle, Merseyside L30 6UR
0151 524 2838
cost around 100 for a frame. top quality bike specialist. ask for John say warrington phil sent you.
Heysham Road, Bootle, Merseyside L30 6UR
0151 524 2838
cost around 100 for a frame. top quality bike specialist. ask for John say warrington phil sent you.
3rd CRM250 MK2, rebuilt incl Braided hoses,powdercoated,one off bronze swingarm bushes,taper head bearings,hard chromed fork, poweredcoated rear spring and rebuilt. custom graphics, also own TL1000s, Aprillia RS250 (300 kit stage 3 tuned), Yamaha RD400c
-
voodookid37
- Site Supporter
- Reactions:
- Posts: 236
- Joined: 14 Feb 2010, 19:23
- Bike Owned: mk1
- Location: ecosse
- Contact:
Re: powder coaters....
many thanks for the replies...i will be having a did there for sure......... 
mk1... with mk2.2 engine,running mk1 electrics,mk1 carb on standard mk1 jetting + settings.dep front pipe.jap alloy can of unknown make. twinair filter on plastic cage.l/h mk1 rad.r/h mk2 (extra coolant takeoff on 2.2 head)
xr650 wheels .gritty front,mitas rear
xr650 wheels .gritty front,mitas rear