New Graphics Set

Thushara · Post by **Thushara** » 16 Aug 2004, 09:28

I have done a new graphics set for my MK3. Just check it out!!!!!!.

I did the printing on a 3M paper and it looks good for me, Picture attached. As you guys knows i have done the compressing to ruduced the file sizes and obviously the immage qulity was redused a bit.

Guys Comment on this !!!

Follow the Link
http://bikepics.com/pictures/196147/

Thushara

edarter · Post by **edarter** » 16 Aug 2004, 13:01

That looks very cool ! Have been planning on something like that for my Mk2 for a while, but just haven't got round to it yet.
You going to continue the theme on the sid panels etc ?

Thushara · Post by **Thushara** » 17 Aug 2004, 05:03

I did for swim arm and today i am going to finish rear fender and fron fender.

Guys appriciate your comment

swim arm ------> http://bikepics.com/pictures/196598/

Thushara

Beanie · Post by **Beanie** » 17 Aug 2004, 08:55

Thushara,

Love those stickers! How about making me up a similar set for a Mk. 2.2 ?

Not exactly the same, but if you are willing and able to do it then I'm sure we can agree a suitable design and price of course?

Let me know, PM or email if you like?

Cheers,

Beanie

Thushara · Post by **Thushara** » 17 Aug 2004, 10:53

Hi Beanie,

Thanks for comment !!!!!!

Well I did this for my hobby and one reason its very difficult to find a graphic set for CRMs and if its there well you have to spend $$$$$$.

I think i can design some atrs for your MK3 and i will pm you

my mail address >>>>>>> thusharaw@pacificstar.lk

Thanks
Thushara

Thushara · Post by **Thushara** » 17 Aug 2004, 11:41

Hi

Just Upload rear new fender Graphics

Commnet!!!!!!!

------->>>>>>>>> http://bikepics.com/pictures/196705/

Thushara

Post by **admin** » 17 Aug 2004, 13:17

these look superb, just need to find someone now who can make them / print them. should sell a few sets if you could get them made

Beanie · Post by **Beanie** » 17 Aug 2004, 14:29

Speaking of which, there are now two sets at the below:

http://www.mdf-g.com/CRM/CRM-menu.html

Beanie

edarter · Post by **edarter** » 18 Aug 2004, 13:10

Thushara - you could make a small fortune doing these. I may well know of a contact in the UK who could print and cut them. He's just 'castol'd a mates Toyota Celica GT4 and the quality is very good indeed. I'll try and find out details but I know he has the tools to print and cut the decals.

Does anyone have the outline patterns for the different fairings etc for the CRM's ? that would be a good starting point for anyone wanting to do this - just outline templates to work within.

Thushara · Post by **Thushara** » 19 Aug 2004, 09:15

But I got a problem coz I am not living in UK, I am in Colombo Sri Lanka.

Well Printing a graphic set here in Sir Lanka not a problem and I have done for couple of my friends bike XR , WR and Lanza. and I have attached those to bike and so far no problem with them. Only problem here is the cutting machine. well I did all hand cutting from a sharp blade knife. its looks like machine cut

Still I have the block of MK3 model I have trace from my bike I think that will fix to AR as well. In this week end I am getting the exact block for MK2 from my friends bike. So I can make some more design for MK2 as well.

If you guys interested please let me know so I can make more & more design for you

Cheers
Thushara

edarter · Post by **edarter** » 19 Aug 2004, 13:34

carry on !!!! I'll be interested in what the Mk2 ones come out like

Bargos · Post by **Bargos** » 21 Aug 2004, 00:21

Trushara, your graphics are superb...do you mind if I print these off and use them on my mark 2?

Thushara · Post by **Thushara** » 26 Aug 2004, 08:03

Hi all,

There is no internet from last saturday for entair country havier damage in some under water cable so i could not upload my Mk2 Graphics.

Any way i did couple of style to MK2 shoulder plane and bit hard for white & Blue color CRM. Also Making file size smaller all the colors was got dul. If you guys give some coment and changes / Modification i think i will be able to get a very good sets of graphics for CRM lover.

Please follow the link and let me know your coment

http://bikepics.com/pictures/201338/
http://bikepics.com/pictures/201339/
http://bikepics.com/pictures/201342/

Thanks
Thushara

edarter · Post by **edarter** » 26 Aug 2004, 13:05

As we're all coming to expect from you - stunning ! These really are cool, especially the first set. I'm goign to have a go at printing one set to paper and cutting it out and taping it to the bike, just to give an idea of what they look like - but from these I suspect they will trick it up nicely !!!

Sigster · Post by **Sigster** » 26 Aug 2004, 18:57

Stunning is the right word id buy them