New Graphics Set
- Thushara
- New kid on the block
- Reactions:
- Posts: 31
- Joined: 08 Sep 2003, 09:33
- Location: Colombo , Sri Lanka
- Contact:
New Graphics Set
I have done a new graphics set for my MK3. Just check it out!!!!!!.
I did the printing on a 3M paper and it looks good for me, Picture attached. As you guys knows i have done the compressing to ruduced the file sizes and obviously the immage qulity was redused a bit.
Guys Comment on this !!!
Follow the Link
http://bikepics.com/pictures/196147/
Thushara
I did the printing on a 3M paper and it looks good for me, Picture attached. As you guys knows i have done the compressing to ruduced the file sizes and obviously the immage qulity was redused a bit.
Guys Comment on this !!!
Follow the Link
http://bikepics.com/pictures/196147/
Thushara
- Thushara
- New kid on the block
- Reactions:
- Posts: 31
- Joined: 08 Sep 2003, 09:33
- Location: Colombo , Sri Lanka
- Contact:
I did for swim arm and today i am going to finish rear fender and fron fender.
Guys appriciate your comment
swim arm ------> http://bikepics.com/pictures/196598/
Thushara
Guys appriciate your comment
swim arm ------> http://bikepics.com/pictures/196598/
Thushara
- Thushara
- New kid on the block
- Reactions:
- Posts: 31
- Joined: 08 Sep 2003, 09:33
- Location: Colombo , Sri Lanka
- Contact:
Hi Beanie,
Thanks for comment !!!!!!
Well I did this for my hobby and one reason its very difficult to find a graphic set for CRMs and if its there well you have to spend $$$$$$.
I think i can design some atrs for your MK3 and i will pm you
my mail address >>>>>>> thusharaw@pacificstar.lk
Thanks
Thushara
Thanks for comment !!!!!!
Well I did this for my hobby and one reason its very difficult to find a graphic set for CRMs and if its there well you have to spend $$$$$$.
I think i can design some atrs for your MK3 and i will pm you
my mail address >>>>>>> thusharaw@pacificstar.lk
Thanks
Thushara
- Thushara
- New kid on the block
- Reactions:
- Posts: 31
- Joined: 08 Sep 2003, 09:33
- Location: Colombo , Sri Lanka
- Contact:
Hi
Just Upload rear new fender Graphics
Commnet!!!!!!!
------->>>>>>>>> http://bikepics.com/pictures/196705/
Thushara
Just Upload rear new fender Graphics
Commnet!!!!!!!
------->>>>>>>>> http://bikepics.com/pictures/196705/
Thushara
Speaking of which, there are now two sets at the below:
http://www.mdf-g.com/CRM/CRM-menu.html
Beanie
http://www.mdf-g.com/CRM/CRM-menu.html
Beanie
Thushara - you could make a small fortune doing these. I may well know of a contact in the UK who could print and cut them. He's just 'castol'd a mates Toyota Celica GT4 and the quality is very good indeed. I'll try and find out details but I know he has the tools to print and cut the decals.
Does anyone have the outline patterns for the different fairings etc for the CRM's ? that would be a good starting point for anyone wanting to do this - just outline templates to work within.
Does anyone have the outline patterns for the different fairings etc for the CRM's ? that would be a good starting point for anyone wanting to do this - just outline templates to work within.
- Thushara
- New kid on the block
- Reactions:
- Posts: 31
- Joined: 08 Sep 2003, 09:33
- Location: Colombo , Sri Lanka
- Contact:
But I got a problem coz I am not living in UK, I am in Colombo Sri Lanka.
Well Printing a graphic set here in Sir Lanka not a problem and I have done for couple of my friends bike XR , WR and Lanza. and I have attached those to bike and so far no problem with them. Only problem here is the cutting machine. well I did all hand cutting from a sharp blade knife. its looks like machine cut
Still I have the block of MK3 model I have trace from my bike I think that will fix to AR as well. In this week end I am getting the exact block for MK2 from my friends bike. So I can make some more design for MK2 as well.
If you guys interested please let me know so I can make more & more design for you
Cheers
Thushara
Well Printing a graphic set here in Sir Lanka not a problem and I have done for couple of my friends bike XR , WR and Lanza. and I have attached those to bike and so far no problem with them. Only problem here is the cutting machine. well I did all hand cutting from a sharp blade knife. its looks like machine cut
Still I have the block of MK3 model I have trace from my bike I think that will fix to AR as well. In this week end I am getting the exact block for MK2 from my friends bike. So I can make some more design for MK2 as well.
If you guys interested please let me know so I can make more & more design for you
Cheers
Thushara
- Thushara
- New kid on the block
- Reactions:
- Posts: 31
- Joined: 08 Sep 2003, 09:33
- Location: Colombo , Sri Lanka
- Contact:
Hi all,
There is no internet from last saturday for entair country havier damage in some under water cable so i could not upload my Mk2 Graphics.
Any way i did couple of style to MK2 shoulder plane and bit hard for white & Blue color CRM. Also Making file size smaller all the colors was got dul. If you guys give some coment and changes / Modification i think i will be able to get a very good sets of graphics for CRM lover.
Please follow the link and let me know your coment
http://bikepics.com/pictures/201338/
http://bikepics.com/pictures/201339/
http://bikepics.com/pictures/201342/
Thanks
Thushara
There is no internet from last saturday for entair country havier damage in some under water cable so i could not upload my Mk2 Graphics.
Any way i did couple of style to MK2 shoulder plane and bit hard for white & Blue color CRM. Also Making file size smaller all the colors was got dul. If you guys give some coment and changes / Modification i think i will be able to get a very good sets of graphics for CRM lover.
Please follow the link and let me know your coment
http://bikepics.com/pictures/201338/
http://bikepics.com/pictures/201339/
http://bikepics.com/pictures/201342/
Thanks
Thushara
As we're all coming to expect from you - stunning ! These really are cool, especially the first set. I'm goign to have a go at printing one set to paper and cutting it out and taping it to the bike, just to give an idea of what they look like - but from these I suspect they will trick it up nicely !!!