2 Stroke tank

Post Reply
User avatar
tomh
Visitor
Visitor
Reactions:
Posts: 68
Joined: 15 Oct 2007, 13:45
2 Stroke tank

Post by tomh » 16 Oct 2007, 09:06

I was wondering how much 2 stroke oil the tank in the frame holds as ive worked out you can only see 100ml in the sight tube. Im guessing the tank is alot deeper than it appears. Does anyone know exactly how much it holds?

User avatar
Gwyn
Site Supporter
Site Supporter
Reactions:
Posts: 783
Joined: 30 Oct 2006, 18:27
Location: All over , WALES.
Re: 2 Stroke tank

Post by Gwyn » 16 Oct 2007, 11:36

[b]tomh :[/b]
> I was wondering how much 2 stroke oil the tank in the frame holds as ive worked
> out you can only see 100ml in the sight tube. Im guessing the tank is alot
> deeper than it appears. Does anyone know exactly how much it holds?

I've got a MK2 Tom, with the oil in the frame like yours. Not sure of the amount of oil that the frame will hold, but it equates to about 2 1/2 - 3 tanks full of petrol used.
Mud, Sweat and Fear


91-MK2

User avatar
tomh
Visitor
Visitor
Reactions:
Posts: 68
Joined: 15 Oct 2007, 13:45

Post by tomh » 17 Oct 2007, 09:55

Thanks for the reply

User avatar
oneandonly04
New kid on the block
New kid on the block
Reactions:
Posts: 45
Joined: 23 Apr 2007, 05:51
Location: !!!!Northern NSW,Australia!!!!

Post by oneandonly04 » 17 Oct 2007, 10:25

an AR holds roughly 1L of oil. Found that out after the bottle overflowed all over the pavers...
99 CRM250AR - Dead
03 YZ250WR - Full rebuild atm!

User avatar
rene
Visitor
Visitor
Reactions:
Posts: 71
Joined: 29 May 2007, 17:32
Location: Sunny Northampton

Post by rene » 17 Oct 2007, 10:45

^^^

did the same got castrol TTS all over my boots now lol

also the AR seems to go on forever 1lt of oil must do 8-9 tanks easly
ZXR750 L1
1986 Maico GM 250
TL1000R

http://www.bikepics.com/members/zxr400rene/" onclick="window.open(this.href);return false;

User avatar
oneandonly04
New kid on the block
New kid on the block
Reactions:
Posts: 45
Joined: 23 Apr 2007, 05:51
Location: !!!!Northern NSW,Australia!!!!

Post by oneandonly04 » 17 Oct 2007, 11:11

i reckon eh? rene you best check the cable that controls the oil pump - i think that may be why my oil lasted so long due to it being so freyed.
99 CRM250AR - Dead
03 YZ250WR - Full rebuild atm!

User avatar
rene
Visitor
Visitor
Reactions:
Posts: 71
Joined: 29 May 2007, 17:32
Location: Sunny Northampton

Post by rene » 17 Oct 2007, 11:25

the AR system was added to make the bikes better on emsions, as a bi product it made it much better on oil and petrol ;)
ZXR750 L1
1986 Maico GM 250
TL1000R

http://www.bikepics.com/members/zxr400rene/" onclick="window.open(this.href);return false;

User avatar
oneandonly04
New kid on the block
New kid on the block
Reactions:
Posts: 45
Joined: 23 Apr 2007, 05:51
Location: !!!!Northern NSW,Australia!!!!

Post by oneandonly04 » 17 Oct 2007, 11:35

and a super tough war machine...
99 CRM250AR - Dead
03 YZ250WR - Full rebuild atm!

User avatar
tomh
Visitor
Visitor
Reactions:
Posts: 68
Joined: 15 Oct 2007, 13:45

Post by tomh » 17 Oct 2007, 11:50

the last owner had filled the tank with crappy oil, think i will drain the tank from the bottom and measure how much comes out then top it up with some high quality silkolene oil.

User avatar
slider
Forum Bore !
Forum Bore !
Reactions:
Posts: 620
Joined: 29 May 2006, 02:23
Location: stoke on trent

Post by slider » 17 Oct 2007, 13:16

tom if you drain the tank,you'll need to bleed the oil pump before you run the motor

User avatar
tomh
Visitor
Visitor
Reactions:
Posts: 68
Joined: 15 Oct 2007, 13:45

Post by tomh » 17 Oct 2007, 14:08

damn, hadnt counted on that, perhaps ill just grin and bear it for a while. or do it at the weekend when ive got more time


Post Reply