ar lacking power

Post Reply
User avatar
malky
New kid on the block
New kid on the block
Reactions:
Posts: 7
Joined: 18 May 2003, 23:01
Location: scotland
ar lacking power

Post by malky » 28 Sep 2003, 22:20

any ideas? my mate has bought a standard mk1 crm,and it has more power than my standard ar,especially when going up steep hills.
both bikes have the same gearing.
if my ar is meant to have more power please help as the bike runs ok

User avatar
rikkster
New kid on the block
New kid on the block
Reactions:
Posts: 20
Joined: 01 Jun 2003, 14:16
Location: gympie australia

Post by rikkster » 29 Sep 2003, 13:20

:!: have you checked the opperation of the dreaded \"ole power valve\" ? if not , remove the rc cover , start the bike ( & warm it up of course) slowly bring the revs up & watch the lever ( the one with the two cables attatched) & check if it's moving up & down in relation with the revs. if not you've got problems. if i remember there is a post in technical about the electrics. hope this helps.
cheers rikkster
\"ride it like ya stole it\" :twisted:
\"IF YOU WANT TO BE DIFFERENT TO THE REST OF THEM, THRASH THE CRAP OUT OF A CRM.\"


Post Reply