AR wiring - part deux

raveydavey · Post by **raveydavey** » 17 Jun 2008, 14:14

Righto - Wiring to relays

New wiring to "nacelle" (cheers FMTB

) is nearly complete with only the wiring to the LED relay causing some head scratching

A 3-wire connector comes off the main loom and plugs into the LED relay (3 plug and 4 plug connectors) according to the wiring diagram. Only problem is, I can't work out the order of the wires, or what colour the 3rd wire is

(t'other 2 being "black" and "green with reddish stripe". By a process of deduction that Sherlock Holmes would be proud of, the 3rd wire is either "green with blue stripe" or "black with green stripe".........possibly.

Can anybody shed any light?

Cheers RD

Post by **fallenmikethebike** » 17 Jun 2008, 20:55

Hi R.D , listen when i get a chance i will pop out into the garage and have a quick look .the problem is ,that I'm a bit busy as i have all these bl@@dy boots to clean , and the boot cleaner's let me down again

,you know how it is , staff ,eh .

Well on mine it appears to be 1 =black 2 = grn/red stripe 3 grn / blue stripe .
Hope this helps
Mike

Post by **kernow krusty** » 17 Jun 2008, 22:44

fallenmikethebike wrote: Hi R.D , listen when i get a chance i will pop out into the garage and have a quick look .the problem is ,that I'm a bit busy as i have all these bl@@dy boots to clean , and the boot cleaner's let me down again ,you know how it is , staff ,eh .

Well on mine it appears to be 1 =black 2 = grn/red stripe 3 grn / blue stripe .
Hope this helps
Mike

HUH! Only MtFB could keep his under crackers next to his boots... then he wonders why the Kernow Boot Fairy hasnt visited!!!

raveydavey · Post by **raveydavey** » 18 Jun 2008, 13:44

kernow krusty wrote:
fallenmikethebike wrote: Hi R.D , listen when i get a chance i will pop out into the garage and have a quick look .the problem is ,that I'm a bit busy as i have all these bl@@dy boots to clean , and the boot cleaner's let me down again ,you know how it is , staff ,eh .

Well on mine it appears to be 1 =black 2 = grn/red stripe 3 grn / blue stripe .
Hope this helps
Mike
HUH! Only MtFB could keep his under crackers next to his boots... then he wonders why the Kernow Boot Fairy hasnt visited!!!

KK - ...................be a man.................and do such a bad job you'll not be asked again.........works for me every time

FMTB - Ta for that - just to clarify, would that be 1 ,2 ,3 from left to right as looking at back of plug with catch bit on top - as shown below??

Cheers RD

Post by **fallenmikethebike** » 18 Jun 2008, 17:35

O/k ,on mine standing on the left ,and front of the bike ,the colours running from left to are , grn/blu--grn/red--black
the black wire on the right is above the red/black ,which in turn is above the yellow of the connector block below .
Now if i had a bit of mud left i could really make it clear

which no thanks to KK i haven't

.
Just so as there are no errors ,i have clearly labelled the dubin pot, and the persil pot , otherwise i can see now how crest fallen KKs going to be when he presents me with my freshly dubined y fronts

raveydavey · Post by **raveydavey** » 20 Jun 2008, 13:50

fallenmikethebike wrote:O/k ,on mine standing on the left ,and front of the bike ,the colours running from left to are , grn/blu--grn/red--black
the black wire on the right is above the red/black ,which in turn is above the yellow of the connector block below .
Now if i had a bit of mud left i could really make it clear which no thanks to KK i haven't .

Clear as a muddy Cornish MX track that's been churned up by a 1000 Cornish MXers dubin-ing Y-fronts and persil-ing boots

AR wiring - part deux

AR wiring - part deux

Re: AR wiring - part deux

Re: AR wiring - part deux

Re: AR wiring - part deux

Re: AR wiring - part deux

Re: AR wiring - part deux