mk2 wiring help needed please

[reeves]

hello peeps

i need some help with my wiring

1 what wires on the loom connect to the headlight
2 what wires are what on the rear light connecting block
3 my bike has ceised to run it has no spark im going to see if the new kill switch is on is off and i need to clean the points on the flywheel but is ther anything else i should look at

everyones help no matter how little will help me infinatly and i thank you in advance

thanks

[Jonorow]

Headlight wires are White, blue and green
Bypass the kill switch by unplugging it
not sure on the rear light but just remeber that earth is dark green

[SkidMark]

Headlight wires are White, blue and green
Bypass the kill switch by unplugging it
not sure on the rear light but just remeber that earth is dark green

surely you need to connect the kill switch wires together!!!

[Jonorow]

I cant remember i think the kill switch works by making the connection not breaking it

[reeves]

all of your help is very usefull thank you

keep it coming please

[knackeredMk1]

Remove the big black cylinder under the headlight (capacitor). Connect a 9v PP3 battery across the terminals this was connected to (+ to red, -ve to green) and use this to test the wiring for the front and rear lights using the switches as you would normally. If you have a circuit tester use this, if not a 9/12v bulb will do.

[reeves]

is the black capicitator your talkin about attached to the headlight bracket

looks like a indicator relay ( thats what i thought it was )

[knackeredMk1]

Capacitor is tubular; relay is much smaller and square.