how do i restrict my crm

User avatar
crm 2/2
New kid on the block
New kid on the block
Reactions:
Posts: 18
Joined: 10 Jan 2010, 22:01
how do i restrict my crm

Post by crm 2/2 » 15 Jan 2010, 12:35

hi i have bought a crm and im only 17 and alowed to ride 33bhp how do i get it restricted to 33bhp

User avatar
xander
Visitor
Visitor
Reactions:
Posts: 53
Joined: 26 May 2008, 19:40
Location: Bath
Re: how do i restrict my crm

Post by xander » 15 Jan 2010, 13:45

just my opinion and it is illegal but its what I did back when I was on the old restricted licence.

I didnt bother restricting it!
been pulled over many times for a variety of non-existant "reasons" and never been asked about it.
If they were to check the power my guess is they'd use a dyno and the CRM as standard doesn't make more than 33bhp at the wheel as far as I know. this would probably satisfy the majority of law enforcement types even though the law states 33bhp at the crank not the wheel. My insurance company never asked about it either. just my opinion and I know it was highly irresponsible of me to have an extra 7bhp......

Failing that, as far as I'm aware f1 international is the company that makes restrictor kits but there isn't one for the Crm. I guess youd have to make some sort of washer for going between the carb/inlet if you're going to restrict it. that's what the restrictor kit was on my other bike.

Lastly I think someone else was looking to do this a while back. Might be worth checking the search function and seeing what they did.

User avatar
crm 2/2
New kid on the block
New kid on the block
Reactions:
Posts: 18
Joined: 10 Jan 2010, 22:01
Re: how do i restrict my crm

Post by crm 2/2 » 15 Jan 2010, 14:04

ok thanks iv been told westgate road in newcastle a bike shop there dus it for 160 pond or another shop prints u out a certifiicate but donsent restrict the bike for 80 pound so im thinking about just geting the certificate to say it has been restricted but realy it hasnt

User avatar
xander
Visitor
Visitor
Reactions:
Posts: 53
Joined: 26 May 2008, 19:40
Location: Bath
Re: how do i restrict my crm

Post by xander » 15 Jan 2010, 14:17

fair enough! All the restrictor kit is is a washer that restricts the flow from the carb but they do cost £150ish for the official kit from f1 international (That's what it cost for my R6). Quite expensive for 4 washers and a certificate. so long as you've got some certificate to show the plod should the worst happen, I think you'll be OK. Dont know what the police are like with bikes around your area but I've been pulled over for "leaning too far on a roundabout", "too much mud on the bike" (number plate/lights were fine) and having numbers on the bikes number board. If they can pull me over for that and still not have a problem with it being unrestricted I think you'll be OK!
As I said though it will still technically be too powerful so dont blame me if you do get in trouble...

fallenmikethebike
NWAA Supporter
NWAA Supporter
Reactions:
Posts: 3520
Joined: 02 Dec 2007, 16:02
Bike Owned: MK3
Location: Mid Surrey
Re: how do i restrict my crm

Post by fallenmikethebike » 15 Jan 2010, 16:21

;) put a 140 Tyre on the back, that slows the plot down quite a bit.
Mike
VFORCE REEDS-MUGEN HEAD AND BARREL-WHITE POWER-ALL ON MY WISH LIST!!

User avatar
AlanH
Forum Regular
Forum Regular
Reactions:
Posts: 239
Joined: 09 Apr 2009, 14:08
Location: Bristol, UK
Re: how do i restrict my crm

Post by AlanH » 15 Jan 2010, 18:34

Even restricted to 33BHP, the CRM is still illegal to ride on a restricted licence because of the power to weight ratio. It needs restricting to considerably less then 33bhp to be legal so if you get a document saying it is 33bhp, that will actually be proof that it is illegal :)

User avatar
delvey91
Site Supporter
Site Supporter
Reactions:
Posts: 159
Joined: 24 Oct 2009, 18:29
Location: Crediton, Devon
Contact:
Re: how do i restrict my crm

Post by delvey91 » 15 Jan 2010, 19:34

Double Post...
Last edited by delvey91 on 15 Jan 2010, 19:35, edited 1 time in total.
99 HONDA CRM250 AR MUGEN
KTM EXC 380 1998 SUPERMOTO 07 SPEC
KTM 525 EXC SUPERMOTO 05

User avatar
delvey91
Site Supporter
Site Supporter
Reactions:
Posts: 159
Joined: 24 Oct 2009, 18:29
Location: Crediton, Devon
Contact:
Re: how do i restrict my crm

Post by delvey91 » 15 Jan 2010, 19:35

Im 18 and had a ZX6R all this summer, pulled multiple times and nothing ever said :)
99 HONDA CRM250 AR MUGEN
KTM EXC 380 1998 SUPERMOTO 07 SPEC
KTM 525 EXC SUPERMOTO 05

User avatar
SkidMark
Site Supporter
Site Supporter
Reactions:
Posts: 810
Joined: 19 Jan 2007, 18:38
Location: Uganda
Contact:
Re: how do i restrict my crm

Post by SkidMark » 15 Jan 2010, 19:48

delvey91 wrote:Im 18 and had a ZX6R all this summer, pulled multiple times and nothing ever said :)
but still if you had got caught by a knowledgeable policeman then it wouldn't be all 'smileys' would it... ;)

not worth the risk in my opinion especially when you've only had your license a year or two and don't need higher insurance premiums than your already paying.
AR's rock!!!
TwinAir filter, Braided Brake Hoses, Swingarm/Shock bearings done!, Rear Shock overhauled and customised by G-Force, 14-44 Gearing, Exhaust decoked (fun with Caustic Soda!), DEP silencer.

User avatar
AlanH
Forum Regular
Forum Regular
Reactions:
Posts: 239
Joined: 09 Apr 2009, 14:08
Location: Bristol, UK
Re: how do i restrict my crm

Post by AlanH » 15 Jan 2010, 20:03

[quote="delvey91"]Im 18 and had a ZX6R all this summer, pulled multiple times and nothing ever said :)[/quote]

So you're now illegally riding a CRM instead then - and posting the evidence on YouTube too. Hmmm.

fallenmikethebike
NWAA Supporter
NWAA Supporter
Reactions:
Posts: 3520
Joined: 02 Dec 2007, 16:02
Bike Owned: MK3
Location: Mid Surrey
Re: how do i restrict my crm

Post by fallenmikethebike » 15 Jan 2010, 20:29

:? I wonder if a restrict er could be place on the power valve, so as the engine was unable to get fully on the pipe, but still retained the bottom end, yes, a bit boring I know, like the old DTs were, but an easy fix when the probation is up.
VFORCE REEDS-MUGEN HEAD AND BARREL-WHITE POWER-ALL ON MY WISH LIST!!

User avatar
crm 2/2
New kid on the block
New kid on the block
Reactions:
Posts: 18
Joined: 10 Jan 2010, 22:01
Re: how do i restrict my crm

Post by crm 2/2 » 15 Jan 2010, 23:13

ok thanks

User avatar
Mudfacetony
Site Supporter
Site Supporter
Reactions:
Posts: 522
Joined: 07 Jun 2007, 06:20
Bike Owned: Mk2.2, Mk3
Location: Durham
Re: how do i restrict my crm

Post by Mudfacetony » 16 Jan 2010, 07:09

Without putting another hurdle in the way, if you have an accident and the insurance company smell a rat, it could invalidate your insurance. I don't think plod is your real problem as some are a bit dense - I got stopped once and he was looking for illegal tyres, the problem is he did not know what constituted legal. But, there are some clever buggers in uniform.

User avatar
weebaldman
New kid on the block
New kid on the block
Reactions:
Posts: 24
Joined: 26 Nov 2009, 11:04
Location: Derbyshire
Re: how do i restrict my crm

Post by weebaldman » 17 Jan 2010, 16:13

Isn't the restricter situated in the airbox and is just a plastic plate which slides in? The workshop manual seems to suggest this.

User avatar
knackeredMk1
Super Moderator
Super Moderator
Reactions:
Posts: 4184
Joined: 03 Nov 2006, 17:41
Bike Owned: Modified Mk1
Re: how do i restrict my crm

Post by knackeredMk1 » 17 Jan 2010, 16:31

The plate that slides into the air box is a baffle that makes the air travel further within the intake system to add a little low end torque and reduce intake noise. Nearly everyone throws it away as it makes very little increase in low end but restricts the top end performance.


Post Reply