no spark again

[Manual_kinguk]

just read the post about no spark on a mk 2.2 and it seems like the pickups are the problems leading to this.but i have also noticed damage to one of wires on the stator windings behind the flywheel.but the bike starts and kicks out twelve volts so i can't see that would be another problem unless i'm wrong

[fallenmikethebike]

Just too confuse fault finding, both items mentioned can, and do break down when they reach operational temperature.
Some one mentioned about applying a coat of "hair spray", as temporary fix, to rule the windings , in , or out.
Mike

[CRaMer]

hi there guys, just to give an update, I ended up buying the new stator pick ups, but still no spark. I'm confused as sh**. I've tested my CDI, rectifier, and coil on my other 2.2, and all works fine. could it perhaps be magnito/flywheel?

[knackeredMk1]

Very unlikely unless it has suffered physical damage and cracked the magnets .

[Manual_kinguk]

i replaced the pickups and stator windings and that did the trick but my windings where damaged.try taking the flywheel off and giving it a good clean inside mine was full of brown gunky stuff which didn't help.

[capt]

My CRM had no spark ,I thought it was the stator plate,overiding the cut out switch was the cure for my bike.

[CRaMer]

Hi there guys, sorry its taken so long to reply, was out of the country on business. just a quick update, I've mentioned that I bought the new stators, but still no spark, huh... but, if I unscrew the spark plug from the head, and then earth it, I then have spark. So this tells me that I'm not getting spark under compression/load. any ideas as to why I've got such weak spark???

Thanks a mil

Julien