intermitant spark

Post Reply
User avatar
plumwasp
New kid on the block
New kid on the block
Reactions:
Posts: 8
Joined: 17 Aug 2013, 14:11
intermitant spark

Post by plumwasp » 17 Aug 2013, 14:22

hi, a bit new to crm s (i own crf x and cr s )
i got hold of an 1992 mk 2 crm, but have trouble with an intermitant spark, it will run for maybe a minute then cut out under load, any ideas would be appreciated, jim

Rustyone
Site Supporter
Site Supporter
Reactions:
Posts: 88
Joined: 03 Dec 2011, 21:37
Re: intermitant spark

Post by Rustyone » 17 Aug 2013, 20:51

Hi Jim, try side stand switch, if still fitted.

User avatar
plumwasp
New kid on the block
New kid on the block
Reactions:
Posts: 8
Joined: 17 Aug 2013, 14:11
Re: intermitant spark

Post by plumwasp » 28 Aug 2013, 16:56

thanks for that rustyone,i have tried this and the kill switch, i reckon i have tracked it down to a faulty connection from behind the headlamp, there is a small pot in black rubber with two wires coming out, when i wiggle those the engine cuts out,any idea where i could get another one ? sorry if i sounf a bit vague, i have owned upwards of 20 different CR S , but thes crm s are a whole different ball game to me,

User avatar
knackeredMk1
Super Moderator
Super Moderator
Reactions:
Posts: 4185
Joined: 03 Nov 2006, 17:41
Bike Owned: Modified Mk1
Re: intermitant spark

Post by knackeredMk1 » 28 Aug 2013, 17:21

Black cylinder? The item you are talking about is a capacitor. They usually don't break so there are quite a few around.

Rusty is splitting a bike at the moment so he might have one?

Rustyone
Site Supporter
Site Supporter
Reactions:
Posts: 88
Joined: 03 Dec 2011, 21:37
Re: intermitant spark

Post by Rustyone » 28 Aug 2013, 20:27

Yes I have one, pm me if you need it, cheers Rusty

User avatar
fishtail
Site Supporter
Site Supporter
Reactions:
Posts: 1048
Joined: 13 Jan 2012, 11:29
Bike Owned: CRM 250 Mk3
Location: derby/leicester border.
Re: intermitant spark

Post by fishtail » 30 Aug 2013, 04:59

probably a loose/damaged wire - quite common for the wires to get pinched in the headstock if your wiring is getting messy behind there...
1996 CRM 250 "Mk 3" FMF pipe .... - the other 'un is a 98 hornet 600 - Sai Kung Hong Kong


Post Reply