Were is my 2 stroke oil going ??

leelandy · Post by **leelandy** » 19 Dec 2005, 19:18

Hi all this may be a simple question / answer but i filled my crm mk2 with 2 stroke oil not all the way to the top but about half way and its not been any were but its dropped to about 1 cm on the sight glass on the head stock ???? help please lol it runs great but its a bitch to start cheers
lee

lee_p · Post by **lee_p** » 20 Dec 2005, 08:59

Hi Lee, don't know if this helps but years ago i had a H100 which like you say fill the 2 stroke tank up and it would slowly disappear. After days of messing about i removed the pipe that is connect to the inlet rubber and surely enough it dripped from the end, left it for a day or so dripping into a container it leaked out roughly what it had lost on the tank.

The fix for that was a new pump something gone AWOL inside pump ???

That too was a pain to start and smoked heavily for the first 5 minutes hope it helps.

Lee

Post by **madmanreevo** » 20 Dec 2005, 21:07

now thats interesting mine smokes pretty heavy at 1st and my last one did and both taking a good few prods to get going when cold......as 2 were like this i just accepted it as a crm thing......

.....not noticed loss of 2 smoke oil.....but my view pipe is not clear...

BALLISTIX · Post by **BALLISTIX** » 21 Dec 2005, 14:33

See this thread, sounds like the old oil seal displacement problem.
Check your gearbox level, I'll bet its overfilled cuz it's filling up with 2-stroke.

viewtopic.php?t=1718