Balancer shaft + clutch arm

Post Reply
User avatar
knackeredMk1
Super Moderator
Super Moderator
Reactions:
Posts: 4185
Joined: 03 Nov 2006, 17:41
Bike Owned: Modified Mk1
Re: Balancer shaft + clutch arm

Post by knackeredMk1 » 21 Jan 2011, 17:56

You shouldn't have any up/down play on the crank or the balance shaft.
Top
tri675
Site Supporter
Site Supporter
Reactions:
Posts: 21
Joined: 18 Jan 2010, 14:34
Re: Balancer shaft + clutch arm

Post by tri675 » 22 Jan 2011, 11:48

+1 As Knackered says no movement the needle bearings £26 from LT and as i posted earlier its possible to repair the bearing surface as i have plus the cost of the clutch cover gasket and while your in there take a look at your water pump cost me £60 for the new mechanical seal.
Top
tri675
Site Supporter
Site Supporter
Reactions:
Posts: 21
Joined: 18 Jan 2010, 14:34
Re: Balancer shaft + clutch arm

Post by tri675 » 28 Jan 2011, 20:12

So the mk3 passed her ticket yesterday she was a scrapper in Nov now shes mechanically perfect and rather than going for bits another CRM on the streets with tons of life and all under £900 with peace of mind :)
Top
Post Reply

Return to “Technical”