Page 3 of 3
Re: CHINESE CDI UNITS
Posted: 29 Aug 2014, 09:17
by MikeWaller
Hi I think I had the first pgm on here I have been running it ok the only thing I have had to do is adjust pv cable just out 2or 3 mil but that was probably because I took the cover off and checked it but if it will last for years who knows but for the price I think it is better than a repair it can't be no worse the only thing I have found is she's a bit long legged but that might be me regards mike
Re: CHINESE CDI UNITS
Posted: 29 Aug 2014, 10:06
by lixianda
pudzie83 wrote:hi lixianda have these units been tested or are they in testing stage? i could be needing one sooner than i thought
looks like my repaired chip has wore out people
still tho 3 years solid use (abuse) out of it not bad at all
easier starting and more power mmmmmm
trying my mates pgm tomorrow to confirm if i got a poorly slag lol
Hi.
We actually had numerous tests before putting into the market. it is the common process. CRM250 CDI are also tested good, removed engine speed limit.
BTW, We've bee doing motorcycle CDI business for nearly 20 years. our products are sold to all over the world, Europe, America, Asia, Australia. to be frank, People buy not only for personal use but also sell. Even Japanese seller buy these product and sell in Japan.
Re: CHINESE CDI UNITS
Posted: 29 Aug 2014, 11:38
by pudzie83
thanks lixianda
how do you mean by long legged mike? as in size?
ive done well over10,000 hard miles on the repaired pgm i can't fault it at all to be honest. Il be sending it to nick again as it will make a fantastic spare for the box (or half a bike building up lol) if i choose a new one.....that im swinging towards another modification is always welcome
Re: CHINESE CDI UNITS
Posted: 29 Aug 2014, 12:00
by MikeWaller
Sorry should have explained it does not seem to rev out as quickly as my Honda one and if the Chinese unit went l look into getting it repaired as nothing loose but my Honda one was good so I packed it away as a good spare and one I knew was good in case of trouble. Regards mike
Re: CHINESE CDI UNITS
Posted: 29 Aug 2014, 12:18
by pudzie83
so there is more revs then
? mine tops out very fast anyway due to the set up. is there any improvement in top speed?
Re: CHINESE CDI UNITS
Posted: 31 Aug 2014, 09:49
by orangeflash
Well I just ordered one for my CRM 250 AR to be tested down under I'll let you know how it goes
Re: CHINESE CDI UNITS
Posted: 01 Sep 2014, 08:55
by lixianda
orangeflash wrote:Well I just ordered one for my CRM 250 AR to be tested down under I'll let you know how it goes
Your order of CDI CRM250AR is sent out right today. Hope you receive it soon.
Re: CHINESE CDI UNITS
Posted: 01 Sep 2014, 15:54
by orangeflash
Can't wait to get my bike running right again
Re: CHINESE CDI UNITS
Posted: 01 Sep 2014, 17:09
by pudzie83
got one ordered as well
same here i missed yesterday's play one outing missed is enough lol
Re: CHINESE CDI UNITS
Posted: 11 Sep 2014, 03:57
by orangeflash
https://vimeo.com/105830478
Fitted my new Lixianda PGM CDI unit instant success power valve has come back to live had a quick test ride seems good
Going for a weekend ride this weekend so I will report how it goes
Re: CHINESE CDI UNITS
Posted: 11 Sep 2014, 04:30
by orangeflash
- ImageUploadedByTapatalk1410406168.763556.jpg (310.26 KiB) Viewed 9250 times
Looking forward to trying this out on the weekend
Re: CHINESE CDI UNITS
Posted: 11 Sep 2014, 09:52
by pudzie83
hoping mine comes today had the p.v cables soaked in oil the last week nice and fresh for the fresh component
il be testing mine as soon as it arrives
The crms on the naughty stool awaiting allen key surgery