I need to do something with my lights to drive at night
I was thinking about connect 30W, 2100lm high power led headlight, mount on yokes,
Specs:

power : 30W
power supply 10V-30V
power consumption 12V: max 2.55A
real consumptio 13.8V: 1.6A
6x 5W CREE XP-G2 LED

Pics from auction
https://www.bikepics.com/pics/2016/06/1 ... 8-full.jpg
https://www.bikepics.com/pics/2016/06/1 ... 7-full.jpg

My question is what i have to do to connect this thing becouse crm haves no battery (AC power?) and this lamp should work DC? Guy who is selling this says do rectifier and bridge (but dont say what specs)

CRM has 12v DC actually so it will work just fine. They don't have a battery but do have a capacitor. I charge my Garmin off the bike power no problem.

That is good news.

What i need to do (i mean fuse etc.)?

from the specs posted above I would wire in via a suitable switch and 3A fuse. My Garmin wiring is wired directly to the plug on the capacitor.

Sorry for noob question which one black part is capacitor in crm?

I decided to buy Polish product (WESEM)
2000lm, 25W, 6° Spot light, Osram LED's
2 years D2D warranty.


http://shop.wesem.com/en/5/6754/lampy_r ... ona_wi_zka


So 3Amp is still enough?

did you fit these? how did it go?