Cuts out - electrical

Post Reply
User avatar
andypandy
New kid on the block
New kid on the block
Reactions:
Posts: 2
Joined: 13 Jan 2020, 11:48
Cuts out - electrical

Post by andypandy » 13 Jan 2020, 11:59

Hi Guys.
I have an AR which has had a switch fitted for the lights.
All was fine until I went out at the weekend then the bike kept cutting out for very brief periods, then altogether when the light switch was switched on.
With the switch off the bike runs , as soon as I flick the lights on it dies. Have checked the switch and changed it just in case. The red wire from the switch goes to a black/green wire in the loom and the black wire from the switch goes to frame earth.
It seems a bit of an odd setup....... lights need to be switched off to start the bike , once running they can be switched on.... however the lights now kill the engine.
Any ideas.............
Cheers

User avatar
Gammakeith
Regular Visitor
Regular Visitor
Reactions:
Posts: 115
Joined: 14 Feb 2010, 18:03
Re: Cuts out - electrical

Post by Gammakeith » 13 Jan 2020, 21:54

Failing regulator or alternator? You'll meed to bet to to check voltage across the capacitor when running to see the state of the charging circuit.

Good luck!

Keith

User avatar
knackeredMk1
Super Moderator
Super Moderator
Reactions:
Posts: 4182
Joined: 03 Nov 2006, 17:41
Bike Owned: Modified Mk1
Re: Cuts out - electrical

Post by knackeredMk1 » 14 Jan 2020, 21:45

Faulty earth/crossed circuit in the lighting circuit.


Post Reply