dep exhausts

Post Reply
User avatar
mrepson
New kid on the block
New kid on the block
Reactions:
Posts: 13
Joined: 19 Apr 2020, 17:44
dep exhausts

Post by mrepson » 28 Apr 2020, 17:51

is there different dep exhausts for crm250ar, :?: as seen one front expansion pipe with dep sport pressed in it,& another with dep pipes pressed in it,so are they both the same,but one is old style or not :?:

Eddie Evans
2016NWAA
2016NWAA
Reactions:
Posts: 461
Joined: 15 Aug 2007, 19:05
Bike Owned: MK3
Location: N Wales
Re: dep exhausts

Post by Eddie Evans » 29 Apr 2020, 09:57

The Mk1 +2 is definitely different. I know people have said that the Mk3 one is different as well but for some reason I think I have a AR DEP pipe fitted to my Mk3.
I don't think there is a lot of difference just in the length of the pipe and the flange fittings but it's a long time ago when I was fitting the pipes so a bit vague now. Leisure trail were very involved in the development with DEP so will be able to tell you for sure if no firm answer comes up.

User avatar
knackeredMk1
Super Moderator
Super Moderator
Reactions:
Posts: 4182
Joined: 03 Nov 2006, 17:41
Bike Owned: Modified Mk1
Re: dep exhausts

Post by knackeredMk1 » 01 May 2020, 16:41

One DEP pipe will fit the Mk1, 2 and 3 or a different pipe for the AR. The difference is the mounting of the neck of the pipe to the barrel. Basically the exhaust studs are in different places. Sometimes owners modify the pipes so they fit.

User avatar
mrepson
New kid on the block
New kid on the block
Reactions:
Posts: 13
Joined: 19 Apr 2020, 17:44
Re: dep exhausts

Post by mrepson » 03 May 2020, 19:32

ok so the pipe with dep sport is for the mk3 model, & the system with dep pipes inbossed is for the ar model then,

Eddie Evans
2016NWAA
2016NWAA
Reactions:
Posts: 461
Joined: 15 Aug 2007, 19:05
Bike Owned: MK3
Location: N Wales
Re: dep exhausts

Post by Eddie Evans » 05 May 2020, 09:14

I now understand your question but do not know the answer.
The link is to the DEP site and does not seem to help either.
It shows the Mk3 and AR were the same pipes and different to the MK1+2 but I can't make out any stamping.
https://www.deppipes.com/product-listin ... -14/crm250
I think the length of the front pipe is slightly longer on one than the other.

User avatar
jim157
Site Supporter
Site Supporter
Reactions:
Posts: 131
Joined: 30 Apr 2014, 22:12
Location: Norwich
Re: dep exhausts

Post by jim157 » 08 May 2020, 07:47

This might be of some use :-
viewtopic.php?f=6&t=9808


Post Reply