250AR - Help needed to establish wiring loom routing

Post Reply
User avatar
Pheasant12
New kid on the block
New kid on the block
Reactions:
Posts: 10
Joined: 03 Dec 2022, 14:06
250AR - Help needed to establish wiring loom routing

Post by Pheasant12 » 22 Mar 2023, 13:53

Hi All

In need of some assistance please. I had a rectifier fail and it fried the PGM/ECU on my AR 1998.
I have had the PGM repaired by Nick in Greece and ready to reassemble and also have a new rectifier.

This occurred some time back and I did not take pictures of the rectifier loom routing.
As the exhaust and shock absorber are near, its a bit of a concern!

Can someone help me with this rectifier loom routing please and if possible, include some photos?

xstian81
NWAA Supporter
NWAA Supporter
Reactions:
Posts: 167
Joined: 06 Aug 2014, 15:02
Bike Owned: Mk3 CRM
Location: Norfolk
Re: 250AR - Help needed to establish wiring loom routing

Post by xstian81 » 23 Mar 2023, 16:29

This is from a MK3, but its probably the same/simular on the AR. It's not a great photo, but it show which way the cable goes around the shock. The frame should have a metal lug that the plug fixes to, so its not floating about (you can just make out another metal lug under the blue plug). I have some over photos of the loom, but none are that great.

Image


Post Reply