Not paid by them or anything but just changed my front wheel bearings and got them from here:

http://www.thebikebearingshop.co.uk/

You'll need 2 x 60032RS for the front wheel. They were made by NTN.

The 2RS means they have 2 rubber seals, so both sides...my old ones must've been plain old RS as they didn't have any seals on one side. Should help them last a bit longer I hope

Including swift postage they were £12.84, good service!

I've just fitted Kyoto ones with 2 seals £4 each + p&p (but i picked them up) from WEMOTO I got a new set of seals from an industrial bearing supplier for £6 (cash). £15.76 for steering head bearings from B&C +P&P.
Its a lot less \"interesting\" round corners now.

Dibble wrote:£15.76 for steering head bearings from B&C +P&P.
Its a lot less "interesting" round corners now.

Would you know the Part number for the steering Head bearings?

You need 2x ...32005x... I don't know what the other numbers refer to. I'll dig the box out of the garage bin when I get home and see which ones I got.
I accidentally found a way of getting the old ones off, I started with a little \"Dremmel\" type thing grinding the old bearing off(after removing the cage and rollers). After a few minutes I'd got a groove running ALMOST vertically up the bearing, thought I'd try hitting it with a Hammer and old wood chisel.
Two light blows later and the bearing twists off up the spindle.piece of...

is there anywhere on this site where there is one comprehensive list of all part numbers etc that everyone has collated for the various bits ? I know the info is scattered around different threads but it would be mighty useful to have it all in one place !

Thanks for that info Dibble

There is a What fits what topic a while back, it contains a few useful bits of information.

Click Here

good thread ! just updated it with some part numbers I know of....