• Oil leak from gear selector shaft seal

Posted: **12 May 2007, 23:15**

Oil is slowly leaking from this area, so I'm guessing it's the seal. Is this an easy fix - any tips would be welcome, cheers

Posted: **13 May 2007, 01:18**

yer very easy. remove old seal by putting in a small self tapper or 2 and pulling.you could use a very small screw driver but be careful not to damage the casing.new one is about £3 from LT.cover in oil and tap back in using a socket of correct size. hope this helps

Posted: **13 May 2007, 14:59**

be carefull to cover the selector shaft splines with some tape to stop them damaging the seal on the way in

Posted: **13 May 2007, 15:08**

Good advice guy's

be carefull to cover the selector shaft splines with some tape to stop them damaging the seal on the way in

Use a condom

Posted: **13 May 2007, 20:43**

Thanks for the advice guys - I will get it sorted now.

Posted: **16 May 2007, 21:30**

Job done no probs, cheers