Hi, checked the FAQ an the boards an found minimum front disc thickness is 2.5mm.
Anyone know what it is for the rear? Mine are mega thin an was just wonderin how id go on at the MOT.
I could do with new ones but since its still in the project stage i dont wanna be shellin out just yet.

Normally it's stamped on the Disc.
Mike

D`oh.. didnt know that. Im such a dumb ass. Cheers Mike

I think that, in common with most other, elder statesmen, on here, we really don't object to answering, and brainstorming, as best we can, for a bunch of enthusiastic amateurs, a solution to problems other owners have experienced.
However, rock up on here, without expending a single iota of your valuable time, and expecting sometimes to receive answers immediately, to banal, FREQUENTLY ASKED QUESTIONS, can bring out the most acidic replies, to what on the face of seems a fairly innocuous request.
It's a bit like the old joke of the wheel with a puncture in it, every ones a comic, and, cheerfully points out the fact it's "only flat at the bottom", fast forward that observation 15 times, and your smile will be pretty thin by then
Mike

fallenmikethebike wrote: I think that, in common with most other, elder statesmen, on here, we really don't object to answering, and brainstorming, as best we can, for a bunch of enthusiastic amateurs, a solution to problems other owners have experienced.
However, rock up on here, without expending a single iota of your valuable time, and expecting sometimes to receive answers immediately, to banal, FREQUENTLY ASKED QUESTIONS, can bring out the most acidic replies, to what on the face of seems a fairly innocuous request.
It's a bit like the old joke of the wheel with a puncture in it, every ones a comic, and, cheerfully points out the fact it's "only flat at the bottom", fast forward that observation 15 times, and your smile will be pretty thin by then
Mike

I think he's trying to say that if you dont search first and ask repeat questions you deserve what you get...(hope to meet you face to face one day Mike - I think it will be a very 'interesting' experience... )

He's a pussy cat .

Have i just had a bollockin, i cant work it out?

twistednuts wrote:Have i just had a bollockin, i cant work it out?

No, sorry if that's the way it came across.
I was hoping to illustrate the difference in helpfulness of responses between those who had made a modicum of effort to seek out an answer to their query,[yes you're in that category], and those that post up mind numbing trivia.
Mike

knackeredMk1 wrote:He's a pussy cat .

GGGRRRROWL,
Mike

No worries, just had a gander at mine, 3mm for front an 4mm for rear. Shat. Mine are miles thinner than these, gonna have to go spendin the wifes lingerie money!

Some good deals on eBay at the moment. You should be looking at ~£50 for the rear and less for the front.

Yeah, been lookin on the gay bay. Nearly 100 quid for firkin brake discs, its breakin me little heart. No-one wants to part wi decent second hand ones, cant really blame em

Front - http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... K:MEWAX:IT

Back - http://cgi.ebay.co.uk/HONDA-CRM250-CRM- ... 4cedb6d791

Thanks for that, never bought owt from Hong Kong before, first for everythin i guess.

Ooooh what bargain I picked up Sunday then, 1 x new front disc[ in a Honda bag]
1 x front sprocket, new.
1 X Magneto puller, new, still in box.
1 x Chain buffer, new.
2 x Exhaust gaskets, new.
£30 result
Plus me eblag bargains
2 x rads
1 back brake master cylinder
Box of axles, plastic reservoirs , engine mounts, and all sorts.
£30 delivered.
Mike