engine rebuild

[caesar]

i got to put new crank bearings and seals in my mk2 is there anything else i should do while im in there cheers Dan

[knackeredMk1]

Check all bearings.

Check wear on piston, rings and bore.

Check balancer shaft for wear.

File away worn tines on clutch basket with a smooth file.

Check for broken teeth on gears and worn dogs on gear change and finally selector drum.

I.E. In case I've missed something - Check everything.

Replace crank seals as a matter or course and check all other seals.

[woolley]

Doesanyone know off the top of there head howmuch sideways movement is accepable on the conrod i have an ar with a rattle so i changed the little end which has not done the trick . iam also told you have to buy the whole crank HELP

cheers

Wool