Ar indicators
-
- Site Supporter
- Reactions:
- Posts: 132
- Joined: 27 Apr 2007, 16:04
Ar indicators
Are they supposed to be permanently on when the engine is running, i.e. not blinking but always on ?
If so is there a way to change it so they are off ?
If so is there a way to change it so they are off ?
-
- Site Supporter
- Reactions:
- Posts: 108
- Joined: 15 Jan 2010, 16:18
Re: Ar indicators
Just the front ones. They should be half lit all the time, and fully lit whilst flashing - the flasher relay has 4 separate feeds, the fronts via a zener and bleed resistor no doubt. BB.
Re: Ar indicators
You can fit an aftermarket relay and do a bit of custom wiring to sort it out. I posted a howto a while back.
-
- Site Supporter
- Reactions:
- Posts: 132
- Joined: 27 Apr 2007, 16:04
Re: Ar indicators
Thanks guys
Yes they are only half lit and flash full power, weird set up
I may in the future attempt to fit an LED relay and led indicators
Yes they are only half lit and flash full power, weird set up
I may in the future attempt to fit an LED relay and led indicators
-
- NWAA Supporter
- Reactions:
- Posts: 3520
- Joined: 02 Dec 2007, 16:02
- Bike Owned: MK3
- Location: Mid Surrey
Re: Ar indicators
I believe the theory is they work as a running light, and lets face it, anything that helps Grandpa Clem, spot you over the top of his Rover 25,, steering wheel and, through the fog of his St Bruno fuelled pipe, just has to be a good idea,IMO.
And apologies in advance if that has just described your Granddad
Laying on the floor being in the right still bleeding hurts.
Mike
And apologies in advance if that has just described your Granddad
Laying on the floor being in the right still bleeding hurts.
Mike
VFORCE REEDS-MUGEN HEAD AND BARREL-WHITE POWER-ALL ON MY WISH LIST!!