Hi All,

Is there an alternative/aftermarket Crankshaft Seal for Mk2? According to manual, it's double sided seal 38*52*9mm, PN 91202-KAE-003.
Local Honda Dealer can bring original seal in 45 days (!), so I'm looking for other option.

Hi vag, try leisure trail in the UK:
http://www.leisuretrail.co.uk/
Not sure what the postage price will be like to you but I'm sure they would get it to you in less than 45 days!

vag wrote:Hi All,

Is there an alternative/aftermarket Crankshaft Seal for Mk2? According to manual, it's double sided seal 38*52*9mm, PN 91202-KAE-003.
Local Honda Dealer can bring original seal in 45 days (!), so I'm looking for other option.

According to lings.com that number is supercede to 91202KAE004 and is £16.

A Viton, double lip seal, from here,
http://simplybearings.co.uk/shop/index. ... th=19_4462
Would be a lot cheaper, just measure you're s and duplicate.
Mike

Answer from LT:

[i]Hello,
Sorry we can not send to ukraine[/i]

Will try other options. :(

take your seal to a bearing shop... they should have what your after... just be sure to explain things to them such as heat and other engine conditions...

>> take your seal to a bearing shop...

It was done straight away after seal was taken off from the engine. No success. :(

Today I found another Honda Dealer, they promised to bring what I need in 20 days max. Will hope for the best.

thats not bad... I just waited 14days for crank bearing in australia.. the time flew