CRM Clutchholding tool...

Post Reply
User avatar
delvey91
Site Supporter
Site Supporter
Reactions:
Posts: 159
Joined: 24 Oct 2009, 18:29
Location: Crediton, Devon
Contact:
Contact delvey91
CRM Clutchholding tool...

Post by delvey91 » 20 Dec 2012, 00:03

Made in about 5 mins using an old disc and a ktm steel plate ;)

Image
99 HONDA CRM250 AR MUGEN
KTM EXC 380 1998 SUPERMOTO 07 SPEC
KTM 525 EXC SUPERMOTO 05
Top
twistednuts
Site Supporter
Site Supporter
Reactions:
Posts: 937
Joined: 07 Feb 2010, 00:37
Location: Lancashire
Re: CRM Clutchholding tool...

Post by twistednuts » 20 Dec 2012, 14:16

Your hands are like shovels dude!!

Good idea though. Dragons den? :?
Top
User avatar
knackeredMk1
Super Moderator
Super Moderator
Reactions:
Posts: 4185
Joined: 03 Nov 2006, 17:41
Bike Owned: Modified Mk1
Re: CRM Clutchholding tool...

Post by knackeredMk1 » 20 Dec 2012, 14:36

Why are you splitting the engine :?: .
Top
fallenmikethebike
NWAA Supporter
NWAA Supporter
Reactions:
Posts: 3520
Joined: 02 Dec 2007, 16:02
Bike Owned: MK3
Location: Mid Surrey
Re: CRM Clutchholding tool...

Post by fallenmikethebike » 20 Dec 2012, 19:52

:BB Brilliant, who hasn't got an old disc hanging about the manor :roll: :roll: "Harold, Harold " , " pray what are you after you dirty old man"
Mike
VFORCE REEDS-MUGEN HEAD AND BARREL-WHITE POWER-ALL ON MY WISH LIST!!
Top
User avatar
delvey91
Site Supporter
Site Supporter
Reactions:
Posts: 159
Joined: 24 Oct 2009, 18:29
Location: Crediton, Devon
Contact:
Contact delvey91
Re: CRM Clutchholding tool...

Post by delvey91 » 20 Dec 2012, 20:35

knackeredMk1 wrote:Why are you splitting the engine :?: .

Drained the gear oil and it was like thick mayonaise!

Looks like someone drowned the bike before and left it, gear box was full of clay/mud, wasnt a nice sight at all, also the side casing gasket was just intsant gasket and the water and oil had also been mixing..... :roll:

Put in new main bearings, balancer shaft and bearings and a new piston kit as the old looked in a bad way, no damage to barrell though. Just putting engine back in frame now, parts came next day from leisure trail, well impressed !

Got a question about the powervalve .... will start a new thread for that one...
99 HONDA CRM250 AR MUGEN
KTM EXC 380 1998 SUPERMOTO 07 SPEC
KTM 525 EXC SUPERMOTO 05
Top
User avatar
helisupp
NWAA Supporter
NWAA Supporter
Reactions:
Posts: 744
Joined: 12 Apr 2012, 21:57
Bike Owned: CRM AR (4)
Location: Gloucester
Re: CRM Clutchholding tool...

Post by helisupp » 20 Dec 2012, 21:36

Well at least you paid a price for the bike that gives you the spare cash to carry out a bit of refurbishment and still have value for money. My ARs had clean oil, immaculate top ends and run near silently with no rumbles or whines but still cost a few quid to sort out.

On subject of powervalves, mine were carboned up, the carbon was restricting range of movement on the valves, but stripped them all and cleaned them up carefully and refitted with a new set of o rings, they are now floppy free with no restriction. The powervalve motors with new cables now have an easier time flipping them about.

I think that as 3 of my ECUs were faulty the powervalves were not moving all the time or giving full movement, allowing carbon build up abnormally.
Top
User avatar
knackeredMk1
Super Moderator
Super Moderator
Reactions:
Posts: 4185
Joined: 03 Nov 2006, 17:41
Bike Owned: Modified Mk1
Re: CRM Clutchholding tool...

Post by knackeredMk1 » 21 Dec 2012, 11:04

There is a view that carbon build up causes the PV to stick or sieze at least over part of its movement. This causes the PV servo to draw more current from the ECU and thus the ECU 'blows'.

So keeping the PV clear of carbon build up helps keep the ECU working :?: .
Top
Post Reply

Return to “Technical”